Peroxide Curing Solid Silicone Rubber (HCR/HTV)
Model No.
SSR1566-40M (Molding), SSR1566-40E (Extrusion), SSR1566-60E (Extrusion)
Product Description
The SSR1566 series peroxide curing solid silicone rubber-HCR/HTV silicone rubber is especially suitable for making power cable accessories by compression molding or extrusion process.
Product Features
1. Shaped by molding or extruding
2. Antifouling
3. Anti-aging
4. Excellent electrical performance
5. Superior thermal stability
6. Light weight for easy transportation and installation
Main Applications
The peroxide curing solid silicone rubber is mainly used for making cable accessories such as cold shrink terminal, cold shrink insulation tubing, coupling and breakout boots.
Packaging
20kg/ctn
Physical properties | Test method | Unit | SSR1566-40M | SSR1566-40E | SSR1566-60E |
Appearance (Color) | translucent or gray | translucent or gray | translucent or gray | ||
SHORE Hardness | D2240 | A | 37 ~ 43 | 37 ~ 43 | 58 ~ 62 |
Tensile strength | D412 | MPa | ≥ 9 | ≥ 9 | ≥ 9 |
Elongation at Break | D412 | % | ≥ 850 | ≥ 850 | ≥600 |
Tear strength | D624B | KN/m | ≥ 30 | ≥ 30 | ≥35 |
Tension Set: Keep 300% extension for 15 hrs at 120 ℃ | D412 DIE C | % | ≤ 8.0 | ≤ 8.0 | ≤ 8.0 |
Volume resistivity | IEC60093 | Ω.cm | 1.0×1015 | 1.0×1015 | 1.0×1015 |
Dielectric strength | IEC60243 | KV/mm | 26 | 26 | 26 |
Notes:
Storage: Stored in an indoor place that is dry and ventilated; keep out of the sun; storage time: 12 month
Molding condition: High pressure curing for 10 minutes at 140℃
Post curing condition: Curing for 2 hours at 200℃
Above parameters are only used for reference. They can not be used as a standard. For specific process conditions, please depend on our product specifications or contact our engineering department.
Shenzhen SQUARE Silicone Co., Ltd.
Address:Building 9th, 3rd Phase, Hemei Industrial Park, Pingzi Road, Pingdi Block, Shenzhen, PR China 518117
Tel.:
(Overseas)
Ext:837
Fax: 86-755-28805428