Addressable LED Strip Light Kit
Request a Quote
- LED type SMD5050
- LED quantity 30pcs/m (9pcs/foot)
- IP rating IP20
- Light color RGB color
Characteristics
The addressable LED strip light kit includes a 5m colored LED strip, power adapter, controller, 3M adhesive backing and a silicone-made buckle.
- The light strip uses a TM1829 control system, which is dedicated for LED constant current driver and to achieve color gradient, light strobing and color chasing.
- Flexible LED strip light is covered with PU glue, it features smooth surface, high light transmittance, rapid heat dissipation. It has an IP rating of IP65 which can prevent intrusion of general solid objects. The LED power supply and LED controller are non-waterproof, so it’s only suitable for dry occasions.
- When the rated DC voltage is 12V, the maximum power will be 7.2W, environment protection and energy saving.
- Flexible LED strip light allows a bending angle of no less than 60°and bending diameter no less than 7cm.
- The light strip is available in 5m, you could cut a different length for your project and request.
- This strip is easy for installation, with 3M adhesive backing or use of a buckle for fixation.
LED strip light specification
| LED type | SMD5050 |
| LED strip light voltage(V) | DC12V |
| Working power | 7.2W/M(Max) |
| Controller IC | TM1829 |
| Light color | RGB |
| Beam angle | 120° |
| Dimension(MM) | 5000×10×0.2mm |
| Material | Fpc |
| Warranty | 2 years |
| Working temperature | -40-50℃ |
| Storage temperature | -50-60℃ |
| Inner package | 5M/Roll |
| Input voltage | AC100-240V |
| Input frequency | 50/60 Hz |
| Output voltage | DC12V (constant voltage) |
| Output current | 2A(Max) |
| Output power | 24W(Max) |
| Over-voltage protection | 15V(Max) |
| Environment temperature | 0℃-40℃、10%RH-90%RH |
| Storage temperature | -20℃-60℃、5%RH-90%RH |
| Plug | EU/US/AU/BS etc. |
| Wire length | 1.5M |
| Controller voltage | DC12V |
| Control mode | 20 types |
| Control type | 24-key infrared remote controller |
| Output | 3 Channels (3*2A) |
| Power | 72W (Max) |
| Lighting arrangement | RGB |
| Sensing distance | 7M(Max) |
| Working temperature | -20-50℃ |
Installation
There is a 3M adhesive on back and you just need to tear off the protective paper and paste it on. You could cut the light strip into different lengths upon request.
- Billboards, lighting projects, house decoration or other lightings.
- Outline or road markings.
- Ceilings, corridors windows or roadway decoration.
- Backlit nameplate or sign.
- Indoor bars or KTV lighting.
Related products
Send Message
Most Recent
More
Other Products
Videos
