Heavy-Duty Vertical Machining Center,Series VMC-850
Request a Quote
VMC-850 Box way vertical machining center is very suitable for heavy cutting and milling, 3 axis uses box ways for high rigidity, spindle speed up to 8000 rpm. Thus, it is suitable for the rough processing and mound manufacturing of a broad scope of products. This vertical machining center only requires a 20KVA power, saving machining cost for users.
Parameters| Model | VMC-850 |
| Stroke | |
| X-axis travel (mm) | 800 |
| Y-axis travel (mm) | 500 |
| Z-axis travel (mm) | 500 |
| Distance from spindle nose to table center (mm) | 110-810 |
| Distance between spindle center to column (mm) | 575 |
| Worktable | |
| Worktable area (mm) | 1000×530 |
| Maximum weight on table (kg) | 600 |
| T-SLOT (WIDTH – NUMBER OF SLOT X SPACING) (mm) | 18-5×110 |
| Spindle | |
| Standard spindle speed (r.p.m) | 8000 |
| Spindle horsepower (KW) | 10 (7.5) |
| Spindle taper | BT40φ150 (belt drive) |
| Feed | |
| X、Y-axis rapid feed (mm/min) | 18000 |
| Z-axis rapid feed (mm/min) | 15000 |
| Triaxial cutting feed (mm/min) | 1-8000 |
| Others | |
| Three-axis motor power (KW) | 3.0/3.0/3.0 |
| Positioning accuracy (mm) | ±0.005/300 |
| Repeatability (mm) | ±0.003/300 |
| Control system | MISUBISHI: M80A/M80B, FANUC: Oi-MF, SINUMERIK 828D |
| Coolant tank (Pump) (HP) | 1/2 |
| Power requirement (KVA) | 20 |
| Air pressure (bar) | 6-7 |
| Machine weight (kg) | 6000 |
| Machine dimension (mm) | 2700×2400×2500 |
- Turntable type tool magazine, holding 24 tools.
- Mechanical spindle, direct drive
- Control system and motor
- Box guideway
Related products
Send Message
Most Recent
More
Other Products
Videos
