GUIBAO 1099 High Performance Silicone Structural Sealant

GUIBAO 1099 High Performance Silicone Structural Sealant
Request a Quote

Structural sealant/ structural glazing/ silicone structural sealant/ building sealant

Basic Uses
GUIBAO 1099 High Performance Silicone Structural Sealant is designed for

  • Structural sealing and glazing for the curtain walls of high-rise buildings and skyscrapers
  • Structural sealing and glazing of large-sized glass panel curtain walls
  • Structural sealing and glazing irregular glass curtain walls
Features
  • Excellent tensile strength and extension/compression capability, ideally suited for high rise curtain walls and skyscrapers, glass and aluminum curtain walls, steel structure curtain walls, etc.
  • Neutral cure, non-corrosive to the surfaces to be bonded
  • Excellent weatherability
  • Excellent stability over temperature range from -50℃ to 150℃
  • Excellent unprimed adhesion to a wide range of substrates
  • Good compatibility with other neutral silicone sealants

Colours
GB1099 is available in black, grey, white or other customized colours.

Packaging
GUIBAO 1099 is available in disposable cartridges (net 300ml) and sausages (net 590ml).

For more details, please download:

These values are not intended for use in preparing specifications.

Test Method Property Unit Standard Result
GB/T 13477 (ISO 7390) Slump mm ≤3 0
GB/T 13477 (ISO 7390) Extrusion rate s ≤3 4.2
GB/T 13477 (ASTM D 2377) Tack free time h ≤10 0.3
GB/T 531.1 (ISO 7619) Hardness Shore A 30~60 47
GUIBAO 16776 (ASTM C 792) Heat Aging
weight loss % ≤10 3.2
cracking Nil Nil
chalking Nil Nil
GB/T 13477 (ISO 8339) Tensile strength MPa
23℃ ≥0.6 1.36
90℃ ≥ 0.45 0.95
-30℃ ≥ 0.45 1.99
water immersion ≥ 0.45 1.42
water-UV exposure ≥ 0.45 1.23
adhesion failure % ≤ 5.0 0
elongation at ultimate tensile strength at 23℃ % ≥ 100 286

*GB: Chinese National Standard
ASTM: American Society for Testing and Materials
ISO: International Standardization Organization

Complete technical information and literature, adhesion testing and compatibility testing results are available from GUIBAO.

Surface Preparation
Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost, old sealants, surface dirt, or glazing compounds and protective coatings.

Application Method
Install back-up materials or joint fillers, setting blocks,
spacer shims, and tapes. Mask areas adjacent to joints to ensure neat sealant lines. Primer is generally not required for non-porous surfaces, but may be necessary for optimal seal performance of certain porous surfaces. So adhesion test is always recommended.

Apply GUIBAO 1099 in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against the backing materials and joint surfaces. Remove masking
tape as soon as the bead is tooled.

    Tags:
Related products
Send Message
Inquiry
Inquiry