Car Spark Plug
Car Spark Plug
According to different heat ranges, the car spark plug can be basically divided into cold and hot types. These two varieties are usually suitable for different engines. If the heat range to use is uncertain, the user is recommended to choose a plug that's too cold rather than a plug that's too hot.
Cold Plugs
The cold spark plug for car is most applicable to high-horsepower high-compression engines. With less heat insulation, more heat can be transferred away from the combustion chamber to the outside of the engine. For a particular application, if the product is not cold enough, it is not able to conduct enough heat out of the piston chamber. Under such a circumstance, serious consequences may be caused, such as pre-ignition, knocking, and permanent engine damage.
Hot Plugs
This type of product can be commonly found in most standard engines. The reason why it is said to be hot as it is a better heat insulator. Therefore, its temperature can be kept high enough to burn off carbon deposits, which allow for more time between the replacement of spark plug.
Hot Item Model
PRSB6E2
Manufacture | POWERMOTO |
Part Number | BPR5ES |
Diameter | 14mm |
Reach | 19mm |
Hex Size | 20.6mm |
Seal Type | Gasket Seat |
Resistor | Yes |
Terminal Type | M4 Thread |
Electrode Material | Copper Core |
Projection Type | Not Projected |
Tip Configuration | Single Electrode |
Gap | 0.8 |
Suit for VW, Benz, | |
PRSB7E6
Manufacture | POWERMOTO |
Part Number | BKR6ES |
Diameter | 14mm |
Reach | 19mm |
Hex Size | 16mm |
Seal Type | Gasket Seat |
Resistor | Yes |
Terminal Type | M4 Thread |
Electrode Material | Copper Core |
Projection Type | Not Projected |
Tip Configuration | Single Electrode |
Gap | 0.8 |
Suit for GM, VW, AUDI, | |
PSB6H2
Manufacturer | POWERMOTO |
Part Number | BP5HS |
Diameter | 14mm |
Reach | 12.7mm (1/2") |
Hex Size | 20.6mm (13/16") |
Seal Type | Gasket Seat |
Resistor | No |
Terminal Type | M4 Thread |
Electrode Material | Copper Core |
Projection Type | Projected |
Tip Configuration | Single Electrode |
Gap | 0.8 |
PRXSB7Q6
Manufacturer | POWERMOTO |
Part Number | BPR6EFS |
Diameter | 14mm |
Reach | 17.5mm (1/2") |
Hex Size | 16mm (13/16") |
Seal Type | Taper |
Resistor | YES |
Terminal Type | M4 Thread |
Electrode Material | Copper Core |
Projection Type | Projected |
Tip Configuration | Single Electrode |
Package
Our Ref. | Size(mm) | Reach(mm) | Hex(mm) | Gap(mm) /- 0.1 | Standard | Projective | Resistor | Taper | Multi electrode | NGK | BOSCH |
PSB6H2 | M14 x 1.25 | 12.7 | 20.6 | 0.8 |
| ★ |
|
|
| BP5HS | W8BC |
PRSB7H2 |
|
|
|
|
| ★ | ★ |
|
| BPR6HS | WR7BC |
PSB6E2 | M14 x 1.25 | 19.0 | 20.6 | 0.8 |
| ★ |
|
|
| BP5ES | W8DC |
PRSB7E2 |
|
|
|
|
| ★ | ★ |
|
| BPR6ES | WR7DC |
PRSB7E6 | M14 x1.25 | 19.0 | 16.0 | 0.8 |
| ★ | ★ |
|
| BKR6ES | FR7DC |
PRXSB6Q6 | M14x1.25 | 17.5 | 16.0 | 0.8 |
| ★ | ★ | ★ |
| BPR5EFS | HR8DC |
For more items, please see the sheet and mail to us.
，PDF：
More Reference No...Download
Related Names
Automobile Nozzles | Motor Vehicle Burner Port | Car Sparking Plug | Auto Ignition Plug
