Energy Saving Dehumidifying Drying System Plastic Resin Dryer

Energy Saving Dehumidifying Drying System Plastic Resin Dryer
Energy Saving Dehumidifying Drying System Plastic Resin Dryer
Energy Saving Dehumidifying Drying System Plastic Resin Dryer
Energy Saving Dehumidifying Drying System Plastic Resin Dryer
Energy Saving Dehumidifying Drying System Plastic Resin Dryer
Energy Saving Dehumidifying Drying System Plastic Resin Dryer
Energy Saving Dehumidifying Drying System Plastic Resin Dryer
Energy Saving Dehumidifying Drying System Plastic Resin Dryer
Energy Saving Dehumidifying Drying System Plastic Resin Dryer
Energy Saving Dehumidifying Drying System Plastic Resin Dryer
Energy Saving Dehumidifying Drying System Plastic Resin Dryer
Energy Saving Dehumidifying Drying System Plastic Resin Dryer
Request a Quote

Application
The energy saving dehumidifying drying system plastic resin dryer is specifically applicable to the high efficiency dehumidification operation of engineering plastics. It is widely applied to injection molding, extrusion, plastic molding and processing and many other industries, as indispensable dehumidifying drying equipment for the production of plastic products in their earlier stage. The saving dehumidifying drying system is suitable for all kinds of plastic materials that need be dehumidified and dried, including PET, TPU, PMMA, PLA, SGP, PS, ABS etc.

Main configuration

Dehumidifier
Dimensions
Volume Dimensions (L*W*H)
Small 1000*1400*1910mm
Medium 1250*1900*2300mm
Large 1600*2050*2300mm

The body of the dehumidifier features a compact design to save space.

Different types of dehumidifiers can be selected for various materials and capacities.
Raw material Drying time h Drying temperature ℃ Water content before drying % Water content after drying % HD150 HD200 HD300 HD400 HD500 HD600 HD800 HD1000 HD1200 HD1600 HD2200 HD2600 HD3000
ABS extrusion 3-4 80-85 ﹤0.2 ﹤0.015 70 90 135 180 225 270 360 450 550 720 900 1000 1300
ABS injection 2-3 85 ﹤0.2 ﹤0.020 75 100 150 200 250 300 400 500 600 800 1000 1200 1500
ABS/PC 3 100 ﹤0.1 ﹤0.020 75 100 150 200 250 300 400 500 600 800 1000 1200 1500
CA 2-3 70 ﹤0.7 ﹤0.020 75 100 150 200 250 300 400 500 600 800 1000 1200 1500
  • Electroplax
    ● The dew point temperature can reach -60℃.
    ● SIEMENS electronic components are configured.
    ● 10 inch color PLC control panel, simple and easy to operate.

  • External filter core
    External filter core, convenient for cleaning.

  • Condenser
    The condenser is easy to disassemble for maintenance.

Equip with two molecular sieve towers for alternate operation, which can stably provide the continual low dew-point dry air.

  • The regenerated gas is cooled to the ambient temperature and then discharged, which does no influence to the temperature in the workshop.


Heat preservation drying hopper

① 80mm thick insulation layer observation door, convenient monitoring.
② Wrapped with 80mm thick aluminum silicate cotton preserves the heat within and saves energy.
③ Anti-eccentric feeding device, uniform blanking, no material fault and single side blanking.

Heat recovery unit

The box is a thermal energy converter with a copper tube super sheet composite design, which effectively guarantees a smooth flow within the air duct and improves the recovery rate of heat energy.

Principle
The high temperature air returned from the drying hopper creates a heat sink with the low temperature air that will enter the heating box. The return air is returned from the A2 to the dehumidifier from the A1 through the heat recovery unit. Meanwhile, the dry air enters the heating box from the B2 through the heat recovery unit from B1. The temperature of the returned high temperature air is reduced, and the temperature of the low temperature air entering into the heating box is increased, so as to achieve the purpose of heat recovery and minimizing energy consumption.


Feeder

The HF feeder series is equipped with a high efficiency vacuum pump with a delivery capacity of up to 1200 kg/h, the maximum conveying distance of 100 meters. It is configured with a cylinder filter which is tightly structured and combines the cyclone effect with dust separation, and is especially suitable for the delivery of dust laden materials

Features
1. Maintenance free motor, convenient filter core cleaning.
2. Noise level is lower than 78DB (A)
3. Vertical design scheme, small covering area.

Why should you use the dehumidifying drying system?
Most engineering plastics and plastic alloy granules contain moisture content to varying degrees, and the moisture content is distributed on the surface of and inside plastic granules. If plastic granules are not properly dried, then the intrinsic quality and appearance quality of plastic products will be affected, while the processing will be more difficult. The intrinsic quality of plastic products is manifest in the significant decrease of its performance, the increase of the internal stress, easy cracking, the promotion of the polymer’s hydrolysis and degradation; the appearance quality in product yellowing, bubbling, defect, silver, markings, as well as the decrease of transparency, product cracking, inaccurate size, poor viscosity.

The presence of moisture, in injection molding and extrusion molding process results in the irregular fluctuation of the plastic melt apparent viscosity, the melt pasting passageway, occasional severe salivation, thus causing difficulties in molding. For most engineering plastics and plastic alloys, strict drying is particularly important, especially for recycled plastics, after washing, granulation and other regeneration processes, of which the moisture content is much higher than standard, and more stringent drying is needed.

Related products
Send Message
Inquiry
Inquiry