FPEV115 Single Sided Foil Woven
Foil-Fabric-Foil Facing, Radiant Barrier& Vapor Barrier
FPEV115 single sided foil woven consists of a layer of aluminum foil and a layer of woven fabric laminated with PE film. The two layers are combined together using high performance bonding agent. The external PE coating provides the woven fabric with smoother surface and better water resistance than our FPE100. The same as FPE100, the product also comes with high tensile strength and abrasion resistance, in addition to its superb radiant barrier and heat insulation performances.
Typical Physical Property| Physical Property | Value (Metric) | Test Method |
| Basis Weight | 115 gsm | Scale |
| Water Vapor Transmission Rate | 1.15 ng/N.s | ASTM E96, Procedure A |
| Tensile Strength -Machine Direction | 250 N/25mm | ASTM D828 |
| Tensile Strength -Cross Direction | 250 N/25mm | ASTM D828 |
| Burst Strength | 260 N/cm2 | ASTM D774 |
| Dimensional Stability | Less than 0.5% | ASTM D1204 @ 150F (65℃ ) |
| Reflectivity of foil surface | 97% | -- |
Available Roll Width: 1.20m, 1.25m, 1.50m
Construction
Aluminum foil in 7 microns thickness Polyethylene bonding agent PE Woven Fabric PE coating
The single sided foil woven combines the advantages of both aluminum foil and PE woven fabric, so it offers a high heat reflectivity up to 97%, and also comes with good flexibility and high tensile strength. Nontoxic and odorless, the material is environmental friendly.
We are a China-based FPEV115 single sided foil woven manufacturer and supplier. Apart from aluminum foil woven fabric, we also offer aluminum foil facing, aluminum foil tape, D/S reflective aluminum foil insulation, and more.
