Heat Shrink Cable End Cap

Heat Shrink Cable End Cap
Heat Shrink Cable End Cap
Heat Shrink Cable End Cap
Heat Shrink Cable End Cap
Request a Quote

Heat shrink cable end cap provides protection to cable ends. In WOER, two types of heat shrink end caps are provided. One is the traditional end cap with adhesive lining that achieves extraordinary environmental insulation and sealing, which, when being heated, helps make a safe and watertight bond with cables. The other is cable end cap with valves that also has adhesive lining while allowing you to inject noble gases to achieve even greater insulation and protection.

Technical Data
Property Test Method Standard Value
Tensile Strength ASTM-D-638 ≥12MPa
Elongation at Break ASTM-D-638 ≥300%
Volume Resistivity IEC 60093 ≥1× Ω.cm
Dielectric Strength IEC 60243 ≥15kV (mm)
Brittle Temperature ISO 974 -40℃
Heat Shock 160℃, 4h No Crack
Water Absorption
(23±2)℃ 24h
ISO 62 ≤0.1%
Hardness (Shore A) ISO 868 ≥80
Dimensions
Spec. As Supplied (mm) After Recovered (mm)
Inner Diameter
Min
Wall Thickness
(±20%)
Height
(±5)
Inner Diameter Max Wall Thickness
(±10%)
WRSFM-12 12 1.0 45 5 2.5
WRSFM-16 16 1.0 70 8.5 2.5
WRSFM-20 20 1.0 70 8.5 2.5
WRSFM-25 25 1.0 80 11 2.5
WRSFM-30 30 1.3 95 16 2.8
WRSFM-35 35 1.0 95 18 2.6
WRSFM-40 40 1.1 95 18 2.6
WRSFM-55 55 1.0 125 26 2.7
WRSFM-75 75 1.3 145 31 3.2
WRSFM-100 97 1.3 140 40 5.2
WRSFM-120 117 1.3 155 57 4.0
WRSFM-140 140 1.3 185 63 4.0
WRSFM-160 158 2.1 270 95 4.0
WRSFM-180 180 2.1 270 95 4.0
WRSFM-200 200 1.5 270 95 4.0
WRSFM-250 245 1.5 270 95 4.0
Related products
Send Message
Inquiry
Inquiry