Heavy Wall Heat Shrink Tubing

Heavy Wall Heat Shrink Tubing
Heavy Wall Heat Shrink Tubing
Heavy Wall Heat Shrink Tubing
Request a Quote
Heavy Wall Heat Shrink Tubing, SBRSW-NF

Model: SBRSW-NF

Adhesive-lined cross-linked polyolefin heat shrinkable tubing

SBRSW-NF heavy wall heat shrink tubing is adhesive-lined heat shrinkable tubing providing maximum reliability for insulation and protection of cable joints and terminations in various electrical applications.


Features
  • 3:1 shrink ratio, not flame-retardant
  • Can withstand severe mechanical requirements of U.R.D., submersible and Direct Burial installations
  • High impact, abrasion, corrosion and chemical resistance
  • Rated for 1kV, 90℃ continuous use application
  • Thermoplastic adhesive liner for complete environmental protection and insulation
  • Continuous operating temperature: -45℃~110℃
  • Fully shrink temperature: 125℃
Dimensions
Size (mm) Expanded After Recovery Standard Package (m/pc)
Internal Diameter (mm) Internal Diameter (mm) Jacket Thickness (mm) Adhesive Thickness (mm) Total Wall Thickness (mm)
8.0/2.0 8.0 2.0 1.80±0.30 0.55±0.20 2.35±0.35 1.22
9.0/3.0 9.0 3.0 2.00±0.30 0.55±0.20 2.55±0.40 1.22
13.0/4.0 13.0 4.0 2.30±0.30 0.55±0.20 2.85±0.40 1.22
16.0/5.0 16.0 5.0 2.30±0.30 0.60±0.20 2.90±0.50 1.22
22.0/6.0 22.0 6.0 2.50±0.40 0.60±0.20 3.10±0.50 1.22
28.0/6.0 28.0 6.0 2.70±0.40 0.70±0.25 3.40±0.50 1.22
33.0/8.0 33.0 8.0 2.80±0.40 0.80±0.25 3.60±0.60 1.22
38.1/12.0 38.1 12.0 3.10±0.50 0.80±0.25 3.90±0.60 1.22
43.2/12.0 43.2 12.0 3.50±0.50 0.80±0.25 4.30±0.70 1.22
55.0/16.0 55.0 16.0 3.60±0.50 0.80±0.25 4.40±0.70 1.22
65.0/19.0 65.0 19.0 3.60±0.50 0.80±0.25 4.40±0.70 1.22
75.0/22.0 75.0 22.0 3.60±0.50 0.80±0.25 4.40±0.70 1.22
85.0/25.0 85.0 25.0 3.60±0.50 0.80±0.25 4.40±0.70 1.22
95.0/30.0 95.0 30.0 3.60±0.50 0.80±0.25 4.40±0.70 1.22
105.0/30.0 105.0 30.0 3.80±0.60 0.80±0.25 4.60±0.70 1.22
120.0/39.0 120.0 39.0 3.80±0.60 0.80±0.25 4.60±0.70 1.22
130.0/40.0 130.0 40.0 3.80±0.60 0.80±0.25 4.60±0.70 1.22
140.0/42.0 140.0 42.0 3.80±0.60 0.80±0.25 4.60±0.70 1.22
160.0/50.0 160.0 50.0 3.80±0.60 0.80±0.25 4.60±0.70 1.22
180.0/60.0 180.0 60.0 3.80±0.60 0.80±0.25 4.60±0.70 1.22
200.0/69.0 200.0 69.0 3.80±0.60 0.80±0.25 4.60±0.70 1.22

Note: tubing without adhesive is available upon request

Technical Data
Property Test Method Standard Performance Typical Performance
Tensile strength (MPa) ASTM D2671 ≥10.4 11.5
Elongation (%) ASTM D2671 ≥300 450
Tensile strength after aging (MPa) UL224 158℃×168hr ≥7.3 8.5
Elongation after aging (%) UL224 158℃×168hr ≥200 350
Dielectric strength (kV/mm) IEC 60243 ≥15 17.5
Volume resistivity (Ω.cm) IEC 60093 ≥1×1014 2.5×1014
Adhesive
Property Test Method Standard Performance
Water absorption ASTM D570 <0.2%
Softening point (℃) ASTM E28 95±5
Peel strength (PE) ASTM D 1000 120N/25mm
Peel strength (AL) ASTM D 1000 80N/25mm
Related products
Send Message
Inquiry
Inquiry