XHH-89-JC Light Gauge Steel Framing Machine

XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
XHH-89-JC Light Gauge Steel Framing Machine
Request a Quote

Steel Frame Roll Forming Machine

XHH-89-JC light gauge steel framing machine is used for producing cold-formedformed web joists and truss framing. This roll former is capable of producing materials with a thickness ranging from 0.6 to 1.2 mm and a coil width of 174mm. The line speed is up to 700m/h. Besides, the steel frame roll forming machine has no chamfer tool, lip cut tool and bolt hole tool.

Metal Framing Component
Specifications
Model C89-JC
Dimension 2850*820*1480mm
Main Motor Power 5.5kW
Hydraulic Motor 5.5kW
Forming Steps 8Steps
Forming Speed 2-3tons/8hours
Voltage 380V/50Hz/3Phase
Effective Width 89mm
Material Width 174mm
Flange Height 38mm
Lip 9mm
Material Thickness 0.6-1.2mm
Tolerance for cutting and punching ±0.5mm
Tolerance for forming ±0.75mm
Control System IPC computer controlling system
Design Software Vertex Software
Rollers Made using SKD-11 steel with heat treatment, hard chrome plating on the surface of rollers
Material for Shaft SKD-11
Material for Puncher SKD-11
Material for Cutter SKD-11
Features
  • Post punching mould

    XHH LGS Machine all with post punching and post cutting, which make more high precision performance on position & dimension

  • Seamless end cut connection

    Seamless end-cut connection is a patent design of XHH LGS FORMER. The two ends of the vertical frame can seamlessly connect to the web of the bottom and top horizontal frames. So the weight of the house can be directly loaded and passed by the vertical frame, which makes the house safer.

  • Continuous web notch punching without extruding material

    The strength of raw material will be greatly reduced when continuous web & lip notches are made, thus material in the pre-punching machine may be easily extruded and then cause machine jam during roll forming process. XHH LGS Machine with post punching system, which we can do more continuous web notch even in 0.55mm thin thickness without extruding material.

  • Lower material wasting

    Short distance between punching & cutting die able to limit the start-up material waste length at 0.02m, and end material waste length within 1 meter.

  • Save Cost

    XHH machine steel strip width is: 170-174mm width, 10mm less than the most other machines in the market. For a 200sqm house, the total frame is around 7000m, can save 439.6-659.4kg material

    Material Thickness 0.8mm 1.0mm 1.2mm
    Material Saved Per House 439.6kg 549.5kg 659.4kg

    The length of each start-up waste of the XHH post-punching & cutting machine is about 1M; most machines on the market are pre-punching & post-cutting (other supplier), their waste material is about 8m on each start-up

    Start-Up/Change Steel Coil 8.11-12.13 Kg
    5 Steel Coils/Day 40.55-60.65 Kg
    Material Saved/Year 12.17-18.2 T
The steel frame roll-forming equipment mainly consists of:
  • Main forming system
  • 1.5 Tons Manual Uncoiler
  • Motor System
  • IPC computer controlling system (Lenovo Laptop)
  • Production software (1set)
  • Design Software-Vertex, forever using license
  • Hydraulic Automatic Punching Device (Web Notch, Swage, Service Hole, Dimple)
  • Hydraulic post-cutting device (material: SKD-11)
  • Automatic printing device
  • Run out table (4m)
Light Steel Construction Projects
Packaging and Transportation of Steel Framing Machine
Customer Show
Company Exhibition
Other Light Gauge Steel Framing Machines with Same Advantages

Related products
Send Message
Inquiry
Inquiry