Roll Forming Machine

Roll Forming Machine
Roll Forming Machine
Roll Forming Machine
Roll Forming Machine
Roll Forming Machine
Roll Forming Machine
Roll Forming Machine
Request a Quote

The roll forming machine is also known as a wheel rim forming machine, and is used for symmetrical or asymmetrical roll forming of steel wheel rims. Theroll forming equipment consists of the main machine, hydraulic transmission system, pneumatic system, PC control system and lubrication system.

Generally, small rim lines and large rim lines carry out 3 processes to complete the rim profiling. Each process uses one set of roll forming machines. However, the ultra-large line completes the rim roll forming operation through 4 processes. The 4 thpresses the roll press into a non-skid pattern.

Process Pictures for Reference
  • 1 stProcess: Roll Forming
  • 2 ndProcess: Roll Forming
  • 3 rdProcess: Roll Forming
  • 4 thProcess: Non-skid pattern rolling

Main Features
1. The forming dies on this wheel rim roll former comes with an easy to dismount design which ensures a quick change of the die, controlling the changing process to take only about 30 minutes.
2. Both the small and large wheel rim lines often use 3 roll forming machines that share one set of automatic load and unload mechanisms. These systems use a 3 process and 4 location design, which saves time and improves production efficiency.
3. The split design between the load/unload unit and the main machine allows for both manual and automatic operations.
4. The roll forming dies can be designed to be symmetric or asymmetric according to processing demands.
5. The upper and lower shafts are hydraulic driven. During the rim profiling, the rotating speed of the upper and lower rollers can be automatically adjusted.
6. The shafts can be adjusted at both dip angles and axial directions. This makes each part of the roller surface uniformity stressed, ensuring the precision.
7. The space between the upper and lower spindle is adjustable, as is the feeding speed.
8. The stroke of a side guide rail is also adjustable.

  • Optional Device for Quick Changeover of Die
  • Automatic Load and Unload Mechanism with a design of Three-Process and Four-Location
Main Technical Parameters of Roll Forming Machine
No. Items Parameters
1 Model GX-23/300 GX-45/600 GX-48/800
2 Roll forming force 230KN 400KN 500KN
3 Motor power of hydraulic system 62.5Kw 82.5Kw 165Kw
4 Length of mould on spindle 350mm 670mm 900mm
5 Upper and lower spindle speed 220r/min 200r/min 200r/min
6 Spindle material and diameter 40Cr, 140mm 40Cr, 200mm 40Cr, 220mm
7 Space between upper and lower spindle 240~380mm 340~480 380~520
8 Lower spindle stroke 140mm 140mm 140mm
9 Adjustable range of lower spindle feeding speed 2~10mm/s 2~10mm/s 2~10mm/s
10 Adjustable dip angle of lower spindle -0.35 ° ~0.17 ° ±0.35° ±0.35°
11 Side guide roller (Linear) Stroke 100mm 140mm 160mm
Adjustable stroke 50mm 50mm 50mm
12 Max. diameter of guide roller 200mm 220mm 240mm
13 Rated input voltage 380V 380V 380V
14 Rate input current 62.5Kw 82.5Kw 165Kw
15 Power cord section (copper) Single core 70mm 2(3 2) Single core 90mm 2(3 2) Single core 180mm 2(3 2)
16 Consumption of hydraulic cooling water 2000L /h 3000L /h 4000L /h
Model: GX-23/300

Roll forming force:230KN

Motor power of hydraulic system:62.5Kw

Length of mould on spindle:350mm

Upper and lower spindle speed:220r/min

Spindle material and diameter:40Cr, 140mm

Space between upper and lower spindle:240~380mm

Lower spindle stroke:140mm

Adjustable range of lower spindle feeding speed:

Adjustable dip angle of lower spindle:

Side guide roller (Linear) Stroke:100mm (50mm adjustable stroke)

Max. diameter of guide roller:200mm

Rated input voltage:380V

Rate input current:62.5Kw

Power cord section (copper):Single core 70mm2 (3 2)

Consumption of hydraulic cooling water:2000L /h

Model: GX-45/600

Roll forming force:400KN

Motor power of hydraulic system:82.5Kw

Length of mould on spindle:670mm

Upper and lower spindle speed:200r/min

Spindle material and diameter:40Cr, 200mm

Space between upper and lower spindle:340~480

Lower spindle stroke:140mm

Adjustable range of lower spindle feeding speed:2~10mm/s

Adjustable dip angle of lower spindle:±0.35°

Side guide roller (Linear) Stroke:140mm (50mm adjustable stroke)

Max. diameter of guide roller:220mm

Rated input voltage:380V

Rate input current:82.5Kw

Power cord section (copper):Single core 90mm2 (3 2)

Consumption of hydraulic cooling water:3000L /h

Model: GX-48/800

Roll forming force:500KN

Motor power of hydraulic system:165Kw

Length of mould on spindle:900mm

Upper and lower spindle speed:200r/min

Spindle material and diameter:40Cr, 220mm

Space between upper and lower spindle:380~520

Lower spindle stroke:140mm

Adjustable range of lower spindle feeding speed:2~10mm/s

Adjustable dip angle of lower spindle:±0.35°

Side guide roller (Linear) Stroke:160mm (50mm adjustable stroke)

Max. diameter of guide roller:240mm

Rated input voltage:380V

Rate input current:165Kw

Power cord section (copper):Single core 180mm2 (3 2)

Consumption of hydraulic cooling water:4000L /h

Related products
Send Message
Inquiry
Inquiry