Press Brake Tooling
Request a Quote
-
Reinforced Press Brake Tooling:
Press Brake Punches and Dies for Hinge forming
- 90° bending
Plate thickness: 0.4-3.2mm - 90° bending (straight)
Plate thickness: 0.4-2.0mm - 90° bending (gooseneck)
Plate thickness: 0.4-5.0mm - 90° bending (door sash)
Plate thickness: 0.4-2.3mm - 90° bending (thick plate)
Plate thickness: 4-10mm - 90° bending
Plate thickness: 0.4-3.2mm - 90° bending
Plate thickness: 0.4-3.2mm - 90° bending
Plate thickness: 0.4-3.2mm - 90° bending (extra-thick plate)
Plate thickness: 7-15mm - 90° bending (radius bending urethane)
Plate thickness: 0.4-3.2mm - Radius bending
Plate thickness: 1.2-1.5mm - Acute angle bending (thick plate)
Plate thickness: 4-5mm - Acute angle bending (pneumatic press brake)
Plate thickness: 0.4-3.0mm - Hemming
Plate thickness: 0.4-1.6mm - Hemming
Plate thickness: 0.4-1.6mm - Hemming (pre-bending)
Plate thickness: 0.4-2.0mm - Hemming (flattening)
Plate thickness: 0.4-2.0mm - Hemming (pre-bending)
Plate thickness: 2.3-3.5mm - Hemming (flattening)
Plate thickness: 0.4-3.2mm - Hemming (flattening)
Plate thickness: 0.4-3.2mm
Number Section shape Order code Number Section shape Order code 16 Whole-body hardening HRC47±2 100TON/M Point radius:
0.2R, 0.8R, 1.5R, 3.0R0.2R L:016021 S:016022 0.8R L:016081 S:016082 1.5R L:016151 S:016152 3.0R L:016301 S:016302 51 HRC47±2 45TON/M Point radius:
0.2R0.2R L:051001 147 Whole-body hardening HRC47±2 45TON/M Point radius:
0.2R, 0.8R, 1.5R, 3.0R0.2R L:147001 0.8R L:147081 1.5R L:147151 3.0R L:147301 48 (High gooseneck) Whole-body hardening HRC47±2 50TON/M Point radius:
0.2R0.2R L:048001 S:048002 116 Whole-body hardening HRC47±2 20TON/M Point radius:
0.2R0.2R L:116001 S:116002 53 Whole-body hardening HRC47±2 45TON/M Point radius:
0.2R0.2R L:053001 11680 Whole-body hardening HRC47±2 11TON/M Point radius:
0.2R0.2R 116801 201 (90° bending door sash) Whole-body hardening HRC47 2 30TON/M Point radius:
0.2R0.2R L:201001 S:201002 462 (Gooseneck) Whole-body hardening HRC47±2 70TON/M Point radius:
0.2R0.2R L:462001 S:462002 20180 Whole-body hardening HRC47±2 15TON/M Point radius:
0.2R0.2R:201801 151 Whole-body hardening HRC47±2 45TON/M Point radius:
0.2R0.2R L:151001 203 (90° bending door sash) Whole-body hardening HRC47±2 30TON/M Point radius:
0.2R0.2R L:203001 S:203002 463 (Gooseneck) Whole-body hardening HRC47±2 50TON/M Point radius:
0.2R0.2R L:463001 S:463002 20380 Whole-body hardening HRC47±2 15TON/M Point radius:
0.2R0.2R:203801 156 Whole-body hardening HRC47±2 30TON/M Point radius:
0.2R0.2R L:156001 108 HRC47±2 50TON/M Point radius:
0.2R0.2R L:108001 S:108002 46 (Medium gooseneck) Whole-body hardening HRC47±2 50TON/M Point radius:
0.2R0.2R L:046001 S:046002 106 Whole-body hardening HRC47±2 12TON/M Point radius:
0.2R0.2R Standard Length:
-
- Standard Die Lengths
Section widths:
left ear/right ear- .394" (10mm)
- .591" (15mm)
- .787" (20mm)
- 1.575" (40mm)
- 3.937" (100mm) left ear
- 3.937" (100mm) right ear
- 7.874" (200mm)
- 11.811" (300mm)
-
- Standard Punch Lengths
- Most tools can be easily loaded by a single operator.
- It is easy to store.
- All sectionalized tools come pre-cut in nine different pieces.
- Most sectionalized punches include two ear pieces (horns).
- NITREX(HRC- 70) is standard on every die in the tooling line.
- Special tooling is available. Please contact our sales team if needed.
-
Note: Special lengths are available at additional cost.
-
- 90° bending