TVVBPG-TV Elevator Flat Cable (Shielded Pairs with Screen, Video, Fiber Optic, Network Wire)
TVVBPG-TV Elevator Flat Cable (Shielded Pairs with Screen, Video, FiberOptic, Network Wire)
Construction
TVVBPG-TV 300/500V24*0.75 2P*2*0.75 4OPT 2CX75 1CAT5E
Introduction of Elevator Flat Cable
1.Insulation and Sheath: PVC insulation, PVC sheath
2.Shielded Pairs:
3.Coaxial Cable:Impedance 75ohm, Capacitance 56.7 pf/m; Attenuation 21.3dB/
4.Optical fibre: 62.5/
5.UTP CAT5e NetworkLine: Frequency 1.0MHZ, characteristic impedance of 100Ω, attenuation of 1.8 ~2.0dB/
6. Rated voltage:300/500V
7. Staticflexibility test:
8. Vertical burn test: passed GB/T18380.11-2008, IEC60332-1:2004 tests
9. Product standard: BS EN 50214:2006, GB/T 5023.6-2006
Guide to Using Onitl Elevator Flat Cable
1. The elevatorflat cable is suitable for use in environments where the ambient temperature is between
2. Under thenormal conditions, the temperature of conductor is lower than
3.Cables arerecommended forinstallations where the freely suspended length doesn't exceed
Cable Scope
| Number of cores | Cores*Nom. Cross-sectional area mm2 | Max. Overall dimension mm |
| 24 | 24*0.75 2P*2*0.75 2CX75 1CAT5e 4OPT 2S | 9.0*68.6 |
| 30 | 30*0.75 2P*2*0.75 1CX75 1CAT5e 4OPT 2S | 9.0*68.6 |
| 36 | 36*0.75 2P*2*0.75 1CX75 1CAT5e 2OPT 2S | 9.0*68.6 |
Note: We could design and manufacture the control core, coaxial and network wire, and the number of fiberoptic unitsaccording to customers’ specific requirements.
Onitl isa
