The electric CNC brake press is integrated with the highest technology. Its transmission components are high quality and suitable for high loads.

• Industry 4.0 Ready
  Connected with LAN and ERP
  Remote assistance and diagnostics
  Simple and user-friendly HMI
• New Design
  Updated Design
  New coded security doors
  High-gloss anti-dirt water-based paint
• Green Hybrid Servo
  Up to 80% energy saving
  100% electrical
  Maximum return on your investment
• High Performance
  More than 35% higher productivity
  Ram speed: 200 mm/s
  X-axis speed: 500 mm/s

Heavy-duty ball screw drives features d/n circulation route design. The high quality stop accuracy by AC servo motor and ball screw for unequalled ram positioning ±0.001mm.

• High Performance
  The high capacity ball screw has larger sphere diameter in higher quantity. The recirculation pipes are located at 180° , ensuring a better load distribution.
• Low Noise
  By gently absorbing the balls in the tangent direction of the spindle axis, the impact of the collision with other components is greatly reduced. Compared to conventional pipe type, noise reduction reaches more than 6dB.
• Grease Retention
  Thanks to the special profile of the spherical cavity of the screw, and together with the grease retaining seal A1, the grease retention characteristics are greatly improved compared to conventional plastic seals.
  The components used in the mechanical transmission ensure high durability while maintaining accuracy over time.

The ball screw press brake is driven by an AC servo motor and ball screw driving mechanism. It maximizes productivity with high speed ram and high precision repeatability(0.001mm). This driving method is superior to all other electric/hydraulic performance and is quiet in operation

• Low maintenance
• Energy saving
  80 % lower consumption than hydraulic brakes on an average.
• Productivity
  Thanks to the high dynamic electro mechanic drive system and “IRIS” safety, 35% shorter cycle times on an average
• Precision
  The beam synchronization is ensured by the control of two independent servo-electric axes. The reading positioning is obtained by two high precision optical linear encoders.
  WILA and ROLLERI pneumatic change tooling system, sophisticated on- and off-line programming possibilities and intuitive touch screen machine interface guarantee short set-up times.
• High quality
  Servo electrically driven upper beam
  Absence of thermal influence of hydraulic oil
• Low Noise
  Allows up to 70% less noise than other machines
• Low maintenance cost
  Being an electric model, it does not require regular maintenance. In addition, the automatic lubrication system is adopted.
  The electric press brake is driven by a combination of heavy duty servo motor and a high performance ball screw. This innovative machine concept combines productivity, accuracy, flexibility and reliability.

The fully electric press brake provides great profit. In addition, the GREENER eco-design enables a significant reduction of environmental impacts and energy savings, which results in cost savings at the same time.

• The electric press brake features the advantages of high acceleration, deceleration and fast response of the servo-electric drive system. Compared to conventional press brakes, considerable productivity increase can be reached; the cycle time is reduced by up to 35 %.
• High speed ram stroke by AC servo motor and ball screw drive for fast approach, bending, and return.