Anchor Drilling Rig, Type MGJ-50 Manufacturer

Anchor Drilling Rig, Type MGJ-50

Request a Quote

About Us: http://cgeg-exploration.com/2-2-2-anchor-drilling-rig.html

Introductions

Anchor drilling rig, type MGJ-50 is applicable in constructions site with limited area. It is mainly used in rock anchoring, retaining wall reinforcement, landslides prevention, rock collapsing and other disaster remediations as well as underground engineering supporting and drilling for foundation of high-rise buildings.

Parameters

Basic parameters	Drilling depth	60~30m
	Drilling diameter	Φ110~Φ180mm
	Diameter of drilling pipe	Depends on the choices on drilling hole
Power head	Low speed type	1st gear	2nd gear	3rd gear	4th gear	Reverse gear
	Rotational speed output (clockwise and counter clockwise)	32r/min	59r/min	108r/min	187r/min	26r/min
	Rated maximum torque output	2800 N.m
	Up down feeding stroke of the power head	1200/1500/2300mm
	High speed type	1st gear	2nd gear	3rd gear	4th gear	Reverse gear
	Rotational speed output (clockwise and counter clockwise)	59r/min	110r/min	200r/min	343r/min	48r/min
	Rated maximum torque output	2800 N.m
	Up down feeding stroke of the power head	1200/1500/2300mm
Power	Electric engine model	Y160M-4
	Power	11KW
	Rotational speed	1455r/min

Features

Drilling angle in one plane: drilling angle at any angle of the vertical elevation angle (180°) with electric motor.
Drill rig has spindle stroke of length 2300mm, spindle stroke for short mast reaching 1500mm and stroke of 1200mm for an ultra-short mast according to the requirements of constructions.
Suitable in small area construction. Impact rotary drilling is used mainly as it has high drilling efficiency.
Mast is raised or lower with power head. Its structure is simple, safe and reliable.
The drill rig base comes in sled or wheel type to cater our customers' preference.