Vertical Centrifugal Pump ZP/ZPR Series

Vertical Centrifugal Pump ZP/ZPR Series
Vertical Centrifugal Pump ZP/ZPR Series
Vertical Centrifugal Pump ZP/ZPR Series
Vertical Centrifugal Pump ZP/ZPR Series
Vertical Centrifugal Pump ZP/ZPR Series
Vertical Centrifugal Pump ZP/ZPR Series
Vertical Centrifugal Pump ZP/ZPR Series
Vertical Centrifugal Pump ZP/ZPR Series
Vertical Centrifugal Pump ZP/ZPR Series
Request a Quote
  • Flow range: 17-1267m3/h
  • Head range: 4-40m
  • Power: 15-200kW
  • Speed: 350-2200r/min
  • Diameter range: DN40-DN300
  • Operation temperature: ≤110℃
  • Wet ends material: high chromium wear-resistant alloy or rubber
  • Structure: vertical, cantilevered, single pump casing, single stage, single suction
Brief introduction

The ZP/ZPR vertical centrifugal pump will operate, even when fully immersed in a slurry pool. Its suction port feature a filter in order to prevent large particles from entering the pump, and this pump series is suitable for the transportation of corrosive, abrasive, and high concentration slurry.

The shaft, pump casing, impeller, guard board, filter and other wet ends are coated with a corrosion-resistant rubber, ensuring the pumps are applicable for transporting rounded slurry under highly corrosive working conditions.

During operation, all parts, with the exception of the water, are fully submerged, allowing this pump to be widely used in oil and gas, pulp and paper, chemical and fertilization, power plants, coal-washing plants and other industrial fields.

Structure
Characteristics
  • Requiring no shaft seal and seal water, this pump will still run normally, even under an insufficient suction power.
  • Uses can choose different drive shaft or suction line lengths according to the slurry pool depth levels.
  • Drive type includes BD and DC, naming belt drive and direct connect drive.
  • The diving depth can be customized according to actual client needs, within a standard size range.
Parameters

Model selection table (clear water performance table)
Note: the following are the general specifications and other sizes can be customized.

Model Max. Power (KW) Liner material Impeller material Capacity (m3/h) Capacity (I/S) Head H(m) Speed n(r/min) Max. Efficiency (η%)
ZP-40PV 15 Metal Metal or Rubber 19.44~43.2 5.4~12 4.5~28.5 1000~2200 40
ZPR-40PV 15 Rubber Rubber 17.28~39.6 4.8~11 4~26 1000~2200 40
ZP-65QV 30 Metal Rubber 23.4~111 6.5~30.8 5~29.5 700~1500 50
ZP-65QV 30 Metal Metal 19.8~93.06 5.5~25.85 5~29.5 700~1500 58
ZPR-65QV 30 Rubber Rubber 22.5~105 6.25~29.15 5.5~31.5 700~1500 51
ZP-65QV 30 Rubber Rubber 22.5~105 6.25~29.15 5.5~31.5 700~1500 35
ZP-100RV 75 Metal Rubber 56.7~221.76 15.75~61.9 4.5~34.5 500~1200 56
ZP-100RV 75 Rubber Rubber 64.8~285 18~79.2 7.5~36 600~1200 62
ZP-100RV 75 Metal Metal 54~237.6 15~66 6~30 600~1200 40
ZPR-100RV 75 Metal Metal 54~289 15~80.3 5~35 500~1200 56
ZP-150SV 110 Metal Rubber 108~479.16 30~133.1 8.5~40 500~1000 52
ZP-200SV 110 Metal Rubber 108~479.16 30~133.1 8.5~40 400~850 64
ZP-250TV 200 Metal Metal or Rubber 261~1089 72.5~302.5 7.5~33.5 400~750 60
ZP-300TV 200 Metal Metal or Rubber 261~1089 72.5~302.5 7.5~33.5 350~700 50
Quick selection chart
Related products
Send Message
Inquiry
Inquiry