Vertical Centrifugal Pump ZP/ZPR Series
Request a Quote
Characteristics
Quick selection chart
- Requiring no shaft seal and seal water, this pump will still run normally, even under an insufficient suction power.
- Uses can choose different drive shaft or suction line lengths according to the slurry pool depth levels.
- Drive type includes BD and DC, naming belt drive and direct connect drive.
- The diving depth can be customized according to actual client needs, within a standard size range.
Model selection table (clear water performance table)
Note: the following are the general specifications and other sizes can be customized.
| Model | Max. Power (KW) | Liner material | Impeller material | Capacity (m3/h) | Capacity (I/S) | Head H(m) | Speed n(r/min) | Max. Efficiency (η%) | |
| ZP-40PV | 15 | Metal | Metal or Rubber | 19.44~43.2 | 5.4~12 | 4.5~28.5 | 1000~2200 | 40 | |
| ZPR-40PV | 15 | Rubber | Rubber | 17.28~39.6 | 4.8~11 | 4~26 | 1000~2200 | 40 | |
| ZP-65QV | 30 | Metal | Rubber | 23.4~111 | 6.5~30.8 | 5~29.5 | 700~1500 | 50 | |
| ZP-65QV | 30 | Metal | Metal | 19.8~93.06 | 5.5~25.85 | 5~29.5 | 700~1500 | 58 | |
| ZPR-65QV | 30 | Rubber | Rubber | 22.5~105 | 6.25~29.15 | 5.5~31.5 | 700~1500 | 51 | |
| ZP-65QV | 30 | Rubber | Rubber | 22.5~105 | 6.25~29.15 | 5.5~31.5 | 700~1500 | 35 | |
| ZP-100RV | 75 | Metal | Rubber | 56.7~221.76 | 15.75~61.9 | 4.5~34.5 | 500~1200 | 56 | |
| ZP-100RV | 75 | Rubber | Rubber | 64.8~285 | 18~79.2 | 7.5~36 | 600~1200 | 62 | |
| ZP-100RV | 75 | Metal | Metal | 54~237.6 | 15~66 | 6~30 | 600~1200 | 40 | |
| ZPR-100RV | 75 | Metal | Metal | 54~289 | 15~80.3 | 5~35 | 500~1200 | 56 | |
| ZP-150SV | 110 | Metal | Rubber | 108~479.16 | 30~133.1 | 8.5~40 | 500~1000 | 52 | |
| ZP-200SV | 110 | Metal | Rubber | 108~479.16 | 30~133.1 | 8.5~40 | 400~850 | 64 | |
| ZP-250TV | 200 | Metal | Metal or Rubber | 261~1089 | 72.5~302.5 | 7.5~33.5 | 400~750 | 60 | |
| ZP-300TV | 200 | Metal | Metal or Rubber | 261~1089 | 72.5~302.5 | 7.5~33.5 | 350~700 | 50 |