Expandable Sleeving

Request a Quote

Website: http://heatshrink-tubing.com/2-4-expandable-sleeving.html

Expandable Sleeving, WPET

• A- Fiber number of each group
• B- Diameter of single fiber

• C- Number of group
• D- The points of 1 inch flat tube (weave density)

Specification description: PET braided tube is made of 72 strands of three 0.25mm monofilaments, with braid density of 8

Dimensions

Specification Selection Sheet
Mode	Normal Size (mm)	Expansion Range (mm)		Recommend Type	Package (m/roll)
		Min.	Max.
WPET-02	2	1	5	1×0.20×24	500m/roll
WPET-03	3	1	6	1×0.20×32	500m/roll
				1×0.25×24	500m/roll
WPET-04	4	2	8	1×0.20×40	500m/roll
				1×0.25×32	500m/roll
				3×0.20×24	500m/roll
WPET-05	5	3	10	1×0.20×48	500m/roll
				1×0.25×40	500m/roll
WPET-06	6	4	12	1×0.20×56	500m/roll
				1×0.25×48	500m/roll
				3×0.20×32	500m/roll
WPET-07	7	5	14	1×0.20×64	500m/roll
				1×0.25×56	500m/roll
WPET-08	8	6	15	1×0.25×64	500m/roll
				3×0.25×24	500m/roll
WPET-10	10	7	20	3×0.20×40	500m/roll
				3×0.25×32	500m/roll
WPET-12	12	8	24	3×0.20×48	500m/roll
				3×0.25×40	250m/roll
WPET-14	14	10	28	3×0.20×56	500m/roll
				3×0.25×48	250m/roll
WPET-16	16	11	26	4×0.25×48	250m/roll
WPET-18	18	12	32	3×0.20×64	500m/roll
				3×0.25×56	250m/roll
WPET-20	20	12	38	3×0.20×72	250m/roll
				3×0.25×64	250m/roll
				4×0.20×64	250m/roll
WPET-25	25	14	39	3×0.20×96	250m/roll
				3×0.25×72	250m/roll
				4×0.20×72	200m/roll
				4×0.25×64	200m/roll
WPET-28	28	15	42	3×0.20×120	250m/roll
				3×0.25×80	200m/roll
				4×0.25×72	100m/roll
WPET-32	32	16	46	3×0.25×96	150m/roll
				4×0.20×96	200m/roll
WPET-35	35	18	50	5×0.25×72	100m/roll
WPET-38	38	20	57	3×0.25×120	100m/roll
WPET-40	40	22	60	4×0.25×96	100m/roll
WPET-45	45	25	70	4×0.25×120	100m/roll
				5×0.25×96	100m/roll
WPET-50	50	30	85	5×0.25×120	100m/roll
WPET-60	60	35	95	6×0.25×120	50m/roll
WPET-70	70	40	110	4×0.38×120	50m/roll
				7×0.25×120	50m/roll

Note:

• Normal lay flat width is the data without force. The normal lay flat width data have deviations because of its expandable. So it cannot be used as a production parameter, only for reference.
• Please inform us the outer diameter, tightness or other requirements of the sleeving. We would recommend the model as required.