Adhesive Tape Slitter Machine

Adhesive Tape Slitter Machine
Adhesive Tape Slitter Machine
Adhesive Tape Slitter Machine
Adhesive Tape Slitter Machine
Adhesive Tape Slitter Machine
Adhesive Tape Slitter Machine
Adhesive Tape Slitter Machine
Adhesive Tape Slitter Machine
Adhesive Tape Slitter Machine
Request a Quote

The adhesive tape slitting machine is designed specifically for slitting wide web tapes. It has a slitting efficiency of 200m of tape/minute.

Technical parameter
Material width 1000/1300mm
Max unwind diameter 700mm
Max rewind diameter 300mm
Slitting width 10-1280mm
Paper core diameter 1-3 inch
Slitting speed 200m/min
Cutting tool 0.2mm×22mm×60mm
Main motor power 3.7KW
Input power 3 phase 380V, 5KW
Features
  • The main motor and the rewinding roller are controlled by torque motor which is durable and simply structured and capable of adapting to high speed.
  • The slitting length can be preset and the machine will switch off automatically when reaching the set length.
  • After finishing one slitting process, the equipment will switch to a second rewinding shaft and start a new slitting process.
Optional device

If you buy an adhesive tape slitting machine, you will also need the following machines

  • Paper pipe punch-through machine
    This machine is suitable for automatic unloading of adhesive products, and it can be paired with an automatic paper pipe device. It is fast and efficient with a 5-7kW air compressor, a total weight of 300kg, and packaging dimensions of 2550*1200*1100(mm).
  • Paper core cutting machine
    This machine is used in repeated composite rolling of defective tapes. The maximum rolling diameter is 300mm, and the inner diameter of the pipe core is 3 inches. We also produce 1 inch composite rolling accessories according to customer requirements, with a composite rolling speed of 150M/MIN, total power is 1/2HP, total weight of 75kg, and packaging dimensions of 550*450*550(mm).
  • Small rewinding machine
    This machine is used in automatic cutting operation of paper pipes, and utilizes a mechanical cutting control, accurate cutting depth positioning and pneumatic loop design. The maximum dividing cutting width is 500mm, the applicable paper pipe thickness is 5mm, the total power is 1.5kW, the power supply is 3 phase 380V, and the weight is about 500Kg, with outer dimensions of 1700*750*1100(mm).
Related products
Send Message
Inquiry
Inquiry