Manual Tong (for Drilling Rig)
Request a Quote
Owetech's manual tongs are designed and manufactured in several models, each according to API Spec 7K standards. This wellhead tong is open, combining a torque tong and spinner tong in one drilling tool that freely disengages from columns. Adjust the handing size of this tong by changing latch lug jaws.
1. Type Q60-273/48(2⅜-10¾in) C Manual Tong
| No. of Latch Lug Jaws | Short Jaw | Hinge Jaw | Handling O.D. | Rated Torque | |
| in | mm | KN·m | |||
| 1# | 2 ⅜ -7 | - | 2 ⅜ -3.668 | 60-93 | 20 |
| 2# | - | 2 ⅞ -4¼ | 73-108 | ||
| 3# | - | 3½-5¼ | 89-133 | 35 | |
| 4# | - | 5¼-7 | 133-178 | 48 | |
| 5# | 7 ⅜ -10¾ | 7-8 ⅝ | 7-8 ⅝ | 178-219 | 35 |
| 6# | 9 ⅝ -10¾ | 9 ⅝ -10¾ | 244-273 | 44 | |
2. Type Q60-273/35(2⅜-10¾in) Well Servicing Tong
| No. of Latch Lug Jaws | Handling O.D. | Rated Torque | |
| mm | in | KN·m | |
| 1# | 60.3-114.3 | 2 ⅜ -4½ | 35 |
| 2# | 114.3-165.1 | 4½-6½ | |
| 3# | 165.1-219.1 | 6½-8 ⅝ | |
| 4# | 244.5-273.1 | 9 ⅝ -10¾ | |
3. Type Q60-178/22(2⅜-7in) LF Manual Tong
| No. of Latch Lug Jaws | Handling Shoulder | Handling O.D. | Rated Torque | |
| mm | in | KN·m | ||
| 1# | 1 | 60.3-73 | 2 ⅜ -2 ⅞ | 22 |
| 2 | 73-88.9 | 2 ⅞ -3½ | ||
| 2# | 1 | 88.9-107.9 | 3½-4¼ | |
| 2 | 107.9-127 | 4¼-5 | ||
| 3# | 1 | 120.7-139.7 | 4¾-5½ | |
| 2 | 139.7-158.7 | 5½-6¼ | ||
| 4# | 1 | 146.1-161.9 | 5¾-6 ⅜ | |
| 2 | 161.9-177.8 | 6 ⅜ -7 | ||
4. Type Q60-178/48(2⅜-10¾¾in) WWB Manual Tong
| No. of Latch Lug Jaws | Handling O.D. | Rated Torque | |
| mm | in | KN·m | |
| 1# | 60.3-95.25 | 2 ⅜ -3¾ | 48 |
| 2# | 88.9-117.48 | 3½-4 ⅝ | |
| 3# | 114.3-146.05 | 4½-5¾ | |
| 4# | 133.35-184.15 | 5¼-7¼ | |
| 5# | 174.6-219.1 | 6 ⅞ -8 ⅝ | |
| 6# | 228.6-273.05 | 9-10¾ | 35 |
5. Type Q73-340/75(2⅞-13⅜in) AAX Manual Tongs
| No. of Latch Lug Jaws | Handling O.D. | Rated Torque | |
| mm | in | KN·m | |
| 1# | 73-95.25 | 2 ⅞ -3¾ | 55 |
| 2# | 88.9-114.3 | 3½-4½ | |
| 3# | 107.95-133.35 | 4¼-5¼ | 75 |
| 4# | 127-177.8 | 5 - 7 | |
| 5# | 174.6-219.1 | 6 ⅞ -8 ⅝ | |
| 6# | 228.6-273.05 | 9-10¾ | 40 |
| 7# | 273.05-298.45 | 10¾-11¾ | |
| 8# | 339.7 | 13 ⅜ | |
6. Type Q86-324/75(3⅜-12¾in) B Manual Tongs
| No. of Latch Lug Jaws | Handling Shoulder | Handling O.D. | Rated Torque | |
| mm | in | KN·m | ||
| 5a | 1 | 86-105 | 3 ⅜ -4 ⅛ | 55 |
| 2 | 105-133 | 4 ⅛ -5¼ | 75 | |
| 5b | 1 | 108-133 | 4¼-5¼ | 75 |
| 2 | 127-146 | 5-5¾ | 75 | |
| 3 | 152-171 | 6-6¾ | 75 | |
| 5b-1 | 1 | 133-146 | 5¼-5¾ | 75 |
| 2 | 152-168 | 6-6 ⅝ | 75 | |
| 3 | 171-203 | 6¾-8 | 55 | |
| 5c | 1 | 168-187 | 6 ⅝ -7 ⅜ | 75 |
| 2 | 187-203 | 7 ⅜ -8 | 75 | |
| 3 | 216-219 | 8½-8 ⅝ | 55 | |
| 5d | 1 | 216-244 | 8½-9 ⅝ | 55 |
| 2 | 270-273 | 10 ⅝ -10¾ | 55 | |
| 5e | 1 | 298 | 11¾ | 55 |
| 2 | 324 | 12¾ | 55 | |
| 5.00E 03 | 1 | 340 | 13 ⅜ | 55 |
7. Type Q89-340/75(3½-13⅜in) SB Manual Tong
| No. of Latch Lug Jaws | Handling Shoulder | Handling O.D. | Rated Torque | |
| mm | in | KN·m | ||
| 1# | 1 | 88.9-104.8 | 3½-4 ⅛ | 55 |
| 2 | 104.8-127 | 4 ⅛ -5 | 55 | |
| 2# | 1 | 108-133.4 | 4¼-5¼ | 75 |
| 2 | 127-146 | 5-5¾ | 75 | |
| 3 | 152.4-171.5 | 6-6¾ | 75 | |
| 3# | 1 | 168.3-184.1 | 6 ⅝ -7¼ | 75 |
| 2 | 187.3-203.2 | 7 ⅜ -8 | 75 | |
| 3 | 215.9-228.6 | 8½-9 | 55 | |
| 4# | 1 | 228.6-244.5 | 9-9 ⅝ | 55 |
| 2 | 269.8-273 | 10 ⅝ -10¾ | 55 | |
| 5# | 1 | 298.5 | 11¾ | 40 |
| 6# | 1 | 323.8-330.2 | 12¾-13 | 40 |
| 7# | 1 | 339.7 | 13 ⅜ | 40 |
8. Type Q89-432/90(3½-17in) DB Manual Tongs
| No. of Latch Lug Jaws | Handling O.D. | Rated Torque | |
| mm | in | KN·m | |
| 1# | 89-210 | 3½-8¼ | 90 |
| 2# | 203-286 | 8-11¼ | 90 |
| 3# | 298-365 | 11¾-14 ⅜ | 55 |
| 4# | 406-432 | 16-17 | 55 |
9. Type Q101-432/140(4-17in) SDD Manual Tongs
| No. of Latch Lug Jaws | No. of Hinge Pin | Pipe size | Rated Torque | |
| in | mm | |||
| 1 | 1 | 4 ─ 5½ | 101.6-139.7 | 140KN·m |
| 5½ ─ 5¾ | 139.7-146 | |||
| 2 | 5½-6 ⅝ | 139.7-168.3 | ||
| 6½-7¼ | 165.1-184.2 | |||
| 3 | 6 ⅝ -7 ⅝ | 168.3-193.7 | ||
| 7¾-8½ | 196.9-215.9 | |||
| 2 | 1 | 8½-9 | 215.9-228.6 | |
| 9½-10¾ | 241.3-273 | |||
| 2 | 10¾-12 | 273-304.8 | ||
| 3 | 1 | 12-12¾ | 304.8-323.8 | 100KN·m |
| 2 | 13 ⅜ -14 | 339.7-355.6 | ||
| 15 | 381 | |||
| 4 | 2 | 15¾ | 400 | 80KN·m |
| 5 | 2 | 16 | 406.4 | |
| 17 | 431.8 | |||
| NOTE:Hinge pin hole of No.2 、 3 、 4&5 Latch Lug Jaw is that of Hinge-jaw Assembly | ||||
10. Type Q340-762/35(13 3/8-30inch) Casing Tong
| Pipe Size | Rated Torque | |
| mm | in | KN·m |
| 340-368 | 13 3/8-14 1/2 | 35 |
| 368-406 | 14 1/2-16 | |
| 406-445 | 16-17 1/2 | |
| 445-483 | 17 1/2-19 | |
| 483-508 | 19-20 | |
| 508-546 | 20-21 1/2 | |
| 546-584 | 21 1/2-23 | |
| 610-648 | 23-25 1/2 | |
| 648-686 | 25 1/2-27 | |
| 686-724 | 27-28 1/2 | |
| 724-762 | 28 1/2-30 | |
| 762-800 | 30-31 1/2 | |
| 800-838 | 31 1/2-33 | |
| 838-876 | 33-34 1/2 | |
| 876-915 | 34 1/2-36 | |
Related products
Send Message
Most Recent
More
Other Products
Videos
