Downhole Motor / Mud Motor

Downhole Motor / Mud Motor
Downhole Motor / Mud Motor
Downhole Motor / Mud Motor
Downhole Motor / Mud Motor
Downhole Motor / Mud Motor
Downhole Motor / Mud Motor
Downhole Motor / Mud Motor
Downhole Motor / Mud Motor
Downhole Motor / Mud Motor
Request a Quote

Drilling motor/ Drilling mud motor/ Mud Motor

Downhole motor is a drilling tool which takes mud as motivation. It consists of Drive shaft assembly, Motor assembly, Cardan shaft assembly, Anti-out assembly and bypass valve assembly of five parts. Mud pump output mud flows through the bypass valve into the motor, and export a certain pressure to promote the rotation of the rotor, the torque and speed transmitted to the drill bit through the cardan shaft and drive shaft. Mud motor's performance depends on the motor assembly.

Downhole motor
The downhole motor is a kind of downhole tool driven by mud pump. Its performance depends on the motor assembly.

Advantages:
1. Increase the drilling speed, shorten the cycle and reduce operating costs.
2. Reduce the wear of the drill pipe and power transmission loss.
3. Accurate deflecting, orientation and correction improve the quality of work.
4. Used for horizontal wells and cluster wells to improve economic efficiency.
5. The compound drilling of vertical well reduces drilling time.
6. Shorten drilling cycle to prevent the pollution of the oil layer.

The oil-well pumps were ready for truck loading and would be sent to Kazakhstan in June, 2014!

Ready to be sent to Kazakhstan

Technical Parameters

Spec. Hole Size Input Flow Rate Pressure Loss Bit Speed Working Torque Delay Dynamic Torque Output Power Max Drilling Weight Joint Thread Length
Unit mm In L/S Mpa r/min N.m N.m KW KN In In mm
5LZ73×7.0 83-121 3 1/4-4 3/4 2-4 3.2 80-160 615 1077 5.8-11.5 25 2 3/8REG 2 3/8REG 3423
9LZ89×7.0 105-143 4 1/8-5 5/8 3-8 3.2 147-392 504 882 8.64-23 30 2 7/8REG 2 7/8REG 2911
5LZ95×7.0 114-150 4 1/8-5 7/8 5-12 3.2 140-320 710 1240 10.5-25 40 2 7/8REG 2 7/8REG 3920
5LZ120×7.0 152-200 6-7 7/8 8-16 3.2 80-180 1850 3200 23-47 106 3 1/2REG 3 1/2REG 5039
5LZ165×7.0V 245-244 8 1/8-9 5/8 18-30 3.2 111-167 4440 7770 57.6-86.4 160 4 1/2REG 4 1/2REG 7408
5LZ165.5×7.0V 215-244 8 1/8-9 5/8 18-30 4.0 120-180 5135 8987 72-108 180 4 1/2REG 4 1/2REG 7748
5LZ172×7.0V 215-244 8 1/8-9 5/8 18-30 4.0 120-180 5135 8987 72-108 180 4 1/2REG 4 1/2REG 7391
5LZ172.5×7.0V 215-244 8 1/8-9 5/8 20-35 4.0 115-180 6452 11299 86.4-151.2 200 4 1/2REG 4 1/2REG 8031
7LZ172.5×7.0V 215-244 8 1/8-9 5/8 20-35 4.0 75-180 6527 11420 59.5-108.6 160 4 1/2REG 4 1/2REG 8631
5LZ185×7.0 215-244 8 1/8-9 5/8 20-35 4.0 184 5436 8154 80-140 240 4 1/2REG 6 1/2REG 8120
5LZ185.5×7.0 215-244 8 1/8-9 5/8 20-35 4.0 173 5939 8908 80-140 240 4 1/2REG 6 1/2REG 8120
5LZ197×7.0 244-311 9 1/8-12 5/8 20-40 3.2 61-122 14118 14118 57.6-115.2 240 5 1/2REG 6 5/8REG 7998
5LZ197.5×7.0 244-311 9 5/8-12 1/4 20-40 4.0 85-160 12640 12640 72-144 260 5 1/2REG 6 5/8REG 8598
7LZ203×7.0 244-311 9 5/8-12 1/4 20-40 3.2 70-155 12289 12289 57.6-126.7 240 5 1/2REG 6 5/8REG 7798
5LZ203.5×7.0 244-311 9 5/8-12 1/4 20-40 4.0 70-155 8778 15362 72-158.4 260 5 1/2REG 6 5/8REG 8598
5LZ244×7.0 311-445 12 1/2-17 1/2 50-75 3.2 91-136 15124 26468 144-216 360 6 5/8REG 7 5/8REG 8635
7LZ244.5×7.0 311-445 12 1/2-17 1/2 50-75 4.0 91-136 18905 33085 180-270 450 6 5/8REG 7 5/8REG 9235
Related products
Send Message
Inquiry
Inquiry