Full Electric Walkie Scissor Aerial Work Platform (Hydraulic Motor) JCPTHD
Given below are standard configurations of this full electric walkie scissor aerial work platform.
1. Proportional control
2. Automatic pot hole protection system
3. 4x2 drive
4. Emergency stop button
5. Emergency descending button
6. Horn
7. Working chronometer
8. Transport standard forklift hole
9. Extended platform
10.Charge protection
11.Self-lock door
12.Total excursion
13.Traceless tyre
14.Self-actuating brake system
15.Oil pipe explosion protection system
16.Fault diagnosis system
17.Tilt protection
18.Motor reset protect
19.Buzzer
20.Folded rail
21.Strut bar for safe overhaul
Here are optional configurations of this full electric walkie scissor aerial work platform.
1. AC power source connected to platform
2. Working lamp
3. Rotary strobe light
4. Overweight sensor
5. Air scoop connected with platform
These are technical parameters of full electric walkie scissor aerial work platform.
| Model | Unit | JCPT0808HD | JCPT1008HD | JCPT1012HD | JCPT1212HD |
| Rated capacity | kg | 380 | 230 | 450 | 320 |
| Extend platform rated | kg | 113 | |||
| capacity | |||||
| Max. number of people | 2 | ||||
| Max. working height | mm | 8000 | 10000 | 10000 | 12000 |
| Max. platform height | mm | 6000 | 8000 | 8000 | 10000 |
| Overall length | mm | 2480 | |||
| Overall length(with outrigger) | mm | 810 | 810 | 1150 | 1150 |
| Overall width | mm | 2210 | 2340 | 2340 | 2470 |
| Over height(rail unfold) | mm | 1750 | 1880 | 1860 | 1990 |
| Overall height(rail fold) | mm | 2270×810 | 2270×810 | 2270×1120 | 2270×1120 |
| Working platform size | mm | 900 | |||
| Platform extend size | mm | 100 | |||
| Ground clearance(stowed) | mm | 19 | |||
| Wheelbase | mm | 1870 | |||
| Min. turning radius(inside) | mm | 0 | |||
| Min. turning radius(outside) | mm | 2190 | 2330 | ||
| Motor | V/kw | 3/24 | |||
| Drive speed(stowed) | km/h | 3.5 | |||
| Drive speed(lifting) | km/h | 0.8 | |||
| Raising/Falling speed | sec | 22/34 | 22/40 | 30/33 | 30/38 |
| Battery | 4×6V/210Ah | ||||
| Charger | V/A | 24/25 | |||
| Max. grade ability | % | 25 | |||
| Max. angle | ì | 2/3 | |||
| Tyre | mm | 381×127 | |||
| NW | kg | 1950 | 2100 | 2300 | 2730 |
