CNC Turret Punch Press, CNC Turret Punch Machine Manufacturer

CNC Turret Punch Press, CNC Turret Punch Machine

Request a Quote

About Us: http://cnc-lasercutting.com/5-2-cnc-turret-punch-press.html

Parameters
1. Servo system: Siemens servo drive
2. Certification: CE ISO
3. Voltage: 380V/220V optional
4. Weight: 1-6T

Thick turret tooling concept is used with all stations bushed. It can be equipped with up to six indexable multi-tool stations (center). Station-to-station indexing is done in three seconds or less.
All dies are positioned below the table surface preventing marking of the sheet. Micro tags can be reduced to minimum for more precise parts.

Siemens 840 Dsi Series CNC Control

It has chosen the very powerful Siemens 840 DsI CNC Control, which has been specially designed for punching. Some of the features are:

2. Programmable work chute
  A large(15.7 x 23.6) programmable work chute allows automatic discharge of parts into a parts container. This feature is available optionally on all other models.
2. Punch frame
  Name: Stress Relieved Bridge Frame Construction
  Finite element analysis is on high performance computers is used in the design process. The concept consists of two fully enclosed box fabrications that are welded put under high load and stress relieved. The result is reduced vibration and deflection under full loads providing greater part precision,reduced tool wear, and noise reduction.
2. Programmable sheet clamps
  The position of the sheet clamps are automatically set by standard program information. Contact sensors automatically stop the machine if these sensors detect any movement of the sheet while it is clamped.
2. Rotational head
  The full 360°programmable head achieves 40 revolution per minute. A harmonic zero backlash gear driven system provides accurate positioning and control.
2. Indexable multi-tools
  1. 3,6,8 and station indexable multi-tools reduce tool changes and increase flexibility.Programmable to. 02 with no upper and lower mechanical connections provides perfect alignment of the upper and lower tool. Even defects or worn tools can be offset.