NC Hydraulic Shearing Machine
Request a Quote
Description
The QC12K series NC hydraulic shearing machine with swing beam is equipped with an economical CNC shear special system, and the back gauge uses imported ball screws and a linear guideway.
- Temperature: 0°C - 40°C
- Humidity: relative humidity is lower than 90%
- Voltage: 3 phase 380V (-15%, +15%), 50Hz
Type | QC12K-4×2500 | QC12K-4×3200 | QC12K-4×4000 | QC12K-6×2500 | QC12K-6×3200 | QC12K-6×4000 | QC12K-6×6000 | QC12K-8×2500 | QC12K-8×3200 | QC12K-8×4000 | QC12K-8×5000 | QC12K-8×6000 | QC12K-12×2500 | QC12K-12×3200 | QC12K-12×4000 | QC12K-12×6000 | QC12K-16×2500 | QC12K-16×3200 | QC12K-16×4000 | QC12K-16×6000 | QC12K-20×2500 | QC12K-20×3200 | QC12K-20×6000 | QC12K-25×2500 | QC12K-25×3200 | QC12K-32×2500 | QC12K-32×3200 | QC12K-40×2500 | |
Shear specification | 4×2500 | 4×3200 | 4×4000 | 6×2500 | 6×3200 | 6×4000 | 6×6000 | 8×2500 | 8×3200 | 8×4000 | 8×5000 | 8×6000 | 12×2500 | 12×3200 | 12×4000 | 12×6000 | 16×2500 | 16×3200 | 16×4000 | 16×6000 | 20×2500 | 20×3200 | 20×6000 | 25×2500 | 25×3200 | 32×2500 | 32×3200 | 40×2500 | |
Shear angle | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°30' | 1°16' | 2° | 2° | 1°54' | 2° | 2°9' | 2° | 2° | 2° | 3° | 2°30' | 2°30' | 3° | 3° | 3°30' | 3°30' | 3°30' | |
Number of stroke | min-1 | ≥22 | ≥18 | ≥12 | ≥16 | ≥12 | ≥10 | ≥7 | ≥12 | ≥10 | ≥10 | ≥8 | ≥6 | ≥10 | ≥9 | ≥8 | ≥4 | ≥9 | ≥8 | ≥7 | ≥4 | ≥5 | ≥5 | ≥4 | ≥5 | ≥5 | ≥4 | ≥4 | ≥3 |
Back gauge adjustment | mm | 20-600 | 20-600 | 20-600 | 20-600 | 20-600 | 20-800 | 20-800 | 20-600 | 20-600 | 20-600 | 20-800 | 20-800 | 20-800 | 20-800 | 20-800 | 20-1000 | 20-800 | 20-800 | 20-1000 | 20-1000 | 20-1000 | 20-1000 | 20-1100 | 20-1000 | 20-1000 | 20-1000 | 20-1500 | 20-1000 |
Throat depth | mm | 85 | 85 | 85 | 145 | 145 | 145 | 140 | 145 | 145 | 145 | 300 | 300 | 300 | 300 | 300 | 320 | 315 | 320 | 320 | 320 | 325 | 320 | 150 | 325 | 325 | 350 | 350 | 200 |
Main motor power | kW | 5.5 | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 11 | 11 | 11 | 11 | 18.5 | 18.5 | 18.5 | 18.5 | 18.5 | 30 | 22 | 22 | 30 | 45 | 30 | 37 | 55 | 37 | 37 | 45 | 45 | 45 |
Net weight | kg | 3460 | 4280 | 6600 | 5140 | 6220 | 8520 | 17000 | 5900 | 7360 | 10200 | 18000 | 21800 | 9000 | 10700 | 13800 | 38000 | 11100 | 14300 | 19700 | 44000 | 16700 | 22000 | 51000 | 20000 | 27000 | 32500 | 42100 | 48000 |
Outline size (L×W×H) | mm | 3100×1430×1450 | 3800×1555×1500 | 4600×1705×1600 | 3150×1500×1600 | 3850×1600×1620 | 4650×1850×1700 | 6780×2450×2100 | 3180×1680×1700 | 3880×1830×1720 | 4680×1980×1780 | 5855×2260×2100 | 6880×2260×2100 | 3300×2030×1840 | 4000×2100×1940 | 4800×2270×2000 | 6900×2800×2500 | 3310×2240×2000 | 4030×2390×2100 | 4820×2490×2460 | 7100×2900×2650 | 3370×2545×2250 | 4190×2695×2300 | 7100×3500×3050 | 3450×2650×2800 | 4130×3100×2800 | 3550×3100×2800 | 4335×3300×3280 | 3600×3450×3200 |
- The frame of the shear machine is entirely welded with steel plates, and treated through a tempering process in order to relieve stress
- The hydraulic dive and return stroke are both smooth and fast thanks to the accumulator, and are easy to manipulate for a reliable performance.
- The portable and prompt adjustment of the blades gap and the value of gap are displayed on a digital display screen, making adjustment easy and fast.
- Equipped with lighting-alignment for strict shearing alignment. The knife beam stroke can be adjusted in a stepless mode.
- Protection fence to ensure operation safety.
- On the rear, there is a simple plate to facilitate material sliding
- Sealing parts of the cylinder: Imported from VALQUA japan, FIETZ Germany.
- Cylinders: Made in china. Surface of the piston is chromium plated.
- Hydraulic system uses imported BOSCH-RexROTH parts.
- Oil pump: gear pump made in China
- Electrical system: Most of the parts in the electrical cabinet are imported from SCHNEIDER, OMRON.
- Control system uses ESTURN E200 System.
- Painting: Dutch imported paint.
- The drive element of the back uses an imported ball screw and linear guideway.
ESTUM E20 CNC system is a professional system for press Shears.
- Motor driven back-gauge automatic orientation
- Motor dead block automatic orientation
- Single direction orientation, to eliminate screw driving gap
- Back-gauge automatically moves in order to avoid interference between the back gauge and work piece.
- Multi-step program automatically performs multiple actions
- 99 working steps could be stored in the memory.
- Outage memory. Store the parameters, programs, positions when the power is switched off.
- Switch between Metric/Imperial system to satisfy different customers.
- Auto-locate reference point. Program counting, step counting and cutting counting.
Related products
Send Message
Most Recent
More
Other Products
Videos