KJ422 Hydraulic Underground Drilling Rig, Tunnel Drilling Equipment
Request a Quote
Application and Features
The KJ422 hydraulic tunneling drilling rig is qualified for the drilling of tunnels whose in the range of 16-95 square meters. The machine is capable of drilling blast holes and rock bolts in a vertical, inclined and horizontal orientations.
- The drill rig is fitted with a flexible boom in two symmetric rectangular coordinates, without any operation blind spots. 360° rotation and self-leveling beam make drill positioning extremely easy. It can also be used for the drilling of lateral cross-cut and rock bolting.
- The drilling rig provides a good view for the operator; balanced layout and the articulated chassis of four-wheel drive ensure the flexible, fast and safe driving in the narrow tunnel.
- The stepped piston is used for the high-frequency impacting rock drill and this can improve the transmission efficiency of impact and drilling speed and reduce the consumption of drilling tools.
- Considerable space and automatic functions enable the driver to concentrate on drilling in a safe, fast and accurate manner;
- All the relevant parts are protected and maintenance is easy.
- Dimension
- Turning Radius
- Coverage area
1. Dimensions and weight
| Length | 15000mm |
| Width | 2550mm |
| Height | 2400/3100mm |
| Weight | Appr.22000kg (excluding the workbench) |
| Tramming speed on flat ground | 10km/h |
| Maximum climbing capacity | 25%（14°） |
| Safety protection | |
| Noise level | ＜100dB(A) |
| Lifting safety roof | Meet the requirements of FOPS and ROPS |
| Air compressor | 1×JN11 | Oil consumption of lubrication | 2×180-250 g/h |
| Capacity of air compressor | 1.55m³/min | ||
| Pressure | 8 bar | Water pump | 1×CR15 |
| Device of shank lubrication | Electronic pulse lubrication pump | Power | 11kW |
| Air consumption of lubrication | 2×0.3m³/min | Capacity of water pump | 12m³/h |
| Noise level | ＜100dB(A) |
| Lifting safety roof | Meet the requirements of FOPS and ROPS |
| Diesel engine | Cummins QSB5.9-C160 | Travelling braking | Wet bridge brake |
| Exhaust purification | Exhaust catalyst | Parking braking | Mechanical brake |
| Drive system | Hydraulic torque converter + gearbox | Fuel tank | 120L |
| Rock drill | 2×HC95LM |
| Impact power | 21kW |
| Impact flow | 100-120L/min |
| Impact pressure | 180-200bar |
| Impact Frequency | 54-62Hz |
| Torque | 764Nm |
| Beam rotation | 360° |
| Feed extension | 1600mm |
| Model of drill boom | K50 |
| Form of drill boom | Self-leveling |
| Boom extension | 1800mm |
| Workbench(optional) |
| Motor | Three-phase motor | ||
| Impact/Feed/Positioning | Axial variable displacement piston pump | ||
| Rotation | Gear pump | ||
| Filter fineness | 10 μ | ||
| Hydraulic oil tank | 400L | ||
| Hydraulic cooler | Water cooler | ||
| Working voltage | 380V | ||
| Frequency | 50Hz | ||
| Starting method | Star-triangle | ||
| Cable reel | 1×CRC1016 | ||
| length of reel cabling | 100m |
Related products
Send Message
Most Recent
More
Other Products
Videos
