GUIBAO 661 Neutral Auto Light Silicone Sealant

GUIBAO 661 Neutral Auto Light Silicone Sealant
Request a Quote

Automotive Sealant/ Silicone Sealant/ Car Sealant

Basic Uses
GUIBAO 661 Neutral Silicone Sealant is specially designed for

  • Watertight bonding and sealing automotive lights
  • Flange seal for the transformer and internal-combustion of automotive
  • Watertight seal of other high-end lights
Features
  • One part, neutral room temperature cure to form an elastomeric rubber
  • Stable performance from –55 ℃ to 180 ℃
  • Excellent unprimed adhesion to a wide range of materials such as metal, plastic, porcelain and glass
  • Low volatile

Colours
GUIBAO 661 is available in black, grey and other customized colours

Packaging
GUIBAO 661 is available in cartridges (net 310ml) or 200Ldrums (net 250kg)

For more details, please download:

Test Method Property Unit Result
As supplied
Appearance Non-flowing paste
GB/T 13477 (ISO 7390) Slump mm 0
GB/T 13477 (ASTM D 2377) Tack free time( 23℃) min. 15-30
Cured after 7 Days, at 23℃ and 45%~55% RH
Appearance Elastomeric
GB/T 531 (ISO 7619) Hardness Shore A 35-40
GB/T 528 (ISO 37) Tensile Strength MPa 2.3-2.8
GB/T 528 (ISO 37) Elongation at break % 350-500

*GB: Chinese National Standard
ASTM: American Society for Testing and Materials
ISO: International Standardization Organization

Surface Preparation
All surfaces of the substrates must be clean and dry. All dust, grease, rust, etc. should be removed.

Adhesion
• GUIBAO 661 has excellent unprimed adhesion to most substrates.
• Priming or plasma processing is necessary for the low surface energy substrates such as PTFE, Polypropylene, Polyethylene
• The cure time may extend when the sealant is applied into deep section or when the ambient temperature is low

Primer
• For optimal adhesion, GUIBAO primer is recommended.
• Clean the substrate surface with solvents and then apply a coat of primer by dipping, brushing or spraying.
• Allow primer to dry for 5~10 minutes. Apply the silicone sealant onto the primer once the substrate surface a little sticky when touched with hand.
• For special applications, drying in the shade, humidification and drying in the high temperature should be adopted to ensure the cure stability.

Application Method
• GUIBAO 661 can be applied manually.
Apply a bead of GUIBAO LV 661 with a dispensing gun to one of the prepared surface, and then cover quickly with the other substrate to be bonded. If applied to deep section, especially when access to moisture is restricted, it takes longer to cure completely. And cure time is extend at lower temperature and humidity
• GUIBAO 661 can also be applied with dispensing machines

    Tags:
Related products
Send Message
Inquiry
Inquiry