Cold In-Place Asphalt Recycling Equipment

Cold In-Place Asphalt Recycling Equipment
Cold In-Place Asphalt Recycling Equipment
Cold In-Place Asphalt Recycling Equipment
Cold In-Place Asphalt Recycling Equipment
Cold In-Place Asphalt Recycling Equipment
Cold In-Place Asphalt Recycling Equipment
Cold In-Place Asphalt Recycling Equipment
Request a Quote

As a piece of road maintenance equipment based on cold in place recycling (CIR), the cold in-place asphalt recycling equipment is able to repair the pavement by recycling the asphalt already used on the asphalt pavement.

Parameters of Asphalt Recycling Equipment GYCBL200:
Parameter Details
Model GYCBL200
Capacity 200 t/h
Feed Bin Volume 2×6 m3
Maximum Particle Size for Mixing 45 mm
Measurement Accuracy for Aggregate ≤0.5%
Measurement Accuracy for Powder ≤0.3%
Measurement Accuracy for Water ≤0.3%
Measurement Accuracy for Emulsified Asphalt ≤0.3%
Hydraulic Power 110 kw
Total Installed Capacity 145 kw
Loading Height 2.9 m
Discharging Height 3.3 m
Weight 14 t
Dimension 15.8×2.5×3.7 m (In Operation); 9.5×2.5×2.8 m (In Transportation)
Features:
  • The utilization of PLC and HMI makes it easy for the operator to set the ratio of each material, real time output, launch time and stop time of each system, as well as monitor operations of each system in real time.
  • The unique mixer blade arrangement ensures an even mixing of reclaimed materials and emulsified asphalt. In doing so, new mixtures with an optimum mixing effect are obtained.
  • The cold in-place asphalt recycling equipment features a frame structure, and the control room and the electrical system are connected. As a result, it is easy to assemble and dissemble the entire equipment piece, and layouts can be done in a variety of ways based on on-site conditions.
  • Emulsified asphalt and water are conveyed into the mixer in a specific ratio using a flow meter.
  • The main power uses a whole set soft start control unit, leading to stable operation and high reliability.
  • The closed-loop control system is composed of a frequency converter, sensor and master controller. This ensures an increase in the precision of the material matching ratio.

Examples

Related products
Send Message
Inquiry
Inquiry