Pre-Amplifier PC1011P,PC-link PA System
Pre-Amplifier PC1011P,PC-link PA System
FEATURES:
Multiple inputs and outputs, 1 unbalanced priority MIC input, 2 unbalanced MIC inputs, 2 balanced MIC inputs, 3 unbalanced sound resource inputs, 2 balanced sound resource inputs, 2 EMC Emergency inputs; two outputs.
Light-touch button operation.
Volume independent control to each channel, the total volume control.
Treble and bass tone controls.
With high brightness, the LCD displays the scale and volume of each channel, the signal dynamic range, high and low tone scale location etc.
With priority function, auto mute (with overriding function).
Built-in chime generator.
PC remote control can be received.
With the address setting function, through the set address, a system can be connected up to 16 Pre-Amplifier PC1011P at most.
Three voltage work modes of AC110V/ AC220V/ DC24V.
SPECIFICATIONS:
Inputs | Mic1, 2, 3 : 600Ω, 2.5mV, unbalance |
Mic4,5 : 600Ω, 2.5mV, balance | |
EMC1, 2, Aux 1, 2, 3 : 10kΩ, 250mV, unbalance | |
Aux 4,5 : 10kΩ, 250mV, balance | |
Audio output | 0dBV |
Frequency response | 20Hz-25kHz(±3dB),Line in |
Gross wave distortion | Aux : 0.05%,Mic : 0.3% |
Signal/ noise ratio | Mic input : 80dB |
Aux input :85dB | |
Tone | Bass :±10dB(100Hz) |
Treble :±10dB(10kHz) | |
Chime | Press the button once,the tune is "(1-3-5-ì-) ",Volume adjustable. |
Protection | AC fuse ×1(220V: F0.6AL, 110V: F1AL) |
| Power Requirement | 1. AC220V/110V 50/60Hz |
2. DC24V | |
Power Requirement | (L×W×H)555×455×185 |
Unit Size(mm) | (L×W×H)484×349.5×88 |
Gross weight | 8.5 kg |
Net weight | 6.7 kg |
Specifications are subject to change without notice.
