YIHUA-2008D Hot Air Rework Station
Request a Quote
- YIHUA-2008D hot air rework station is small and delicate with the aluminum alloy case and panel.
- It has three storage locations, separately used to set or store different temperature and air volume values. Based on the actual application requirements, you can speedily adjust the storage unit settings with the shortcut keys. So to speak, our equipment is extremely suitable for the standardized assembly line production.
- The rework station can achieve the real-time tracking and real-time correction of air outlet temperature, since it is equipped with the microcomputer PID program. The PID temperature correction cycle is 100ms. Due to the rapid correction of the temperature, the equipment is low in power consumption.
- YIHUA-2008D hot air rework station adopts the brushless fan which comes with long service life but low noise generation. Additionally, it is doubled in working efficiency, because of the high quality heating element used to the brushless fan.
- Its air gun handle utilizes the high quality skeleton heater. This type of heater is durable in use, and offers high efficiency. Besides that, the air gun handle comes with the security protection function. When power on, the handle must be at frame, so that the machine can start working properly.
- Finally, our YIHUA-2008D hot air rework station can automatically detect the failures. If there are any failures, it will send out alarming signals.
| Working Voltage | AC 220V±10% 50Hz |
| Output Power | 650W |
| 300℃ Constant Temperature Power (rapid PID program control, energy -saving) | 200W ± 10% |
| Working Condition | 0 ~40℃ relative humidity < 80% |
| Storage Temperature | -20 ~80℃ relative humidity < 80% |
| Dimensions | 138*100*150 mm |
| Weight | 1.95KG |
| Temperature Range | 100℃~480℃ |
| Air Supply Mode | Brushless fan air supply |
| Air Flow | 120L/min (Max.) |
| Temperature Stability | ±2℃ (static state) |
| Display Mode | LED digital display |
| Temperature Correction Mode | PID Digital program calibrate |
| PID Temperature Correction Cycle | 100ms |
| Heating Element | Ceramic skeleton heater |
| Timing Heating Function | Three memories: First memory segment defaults to 200oC, 5 seconds; Second memory segment defaults to 300oC, 17 seconds; Third memory segment defaults to 240oC, 12 seconds. |
Standard Configuration
Desoldering Station: 1pc
User manual: 1pc
Air Gun Handle: 1pc
Nozzle: 3 (5mm, 8mm, 10mm)
IC Extractor: 1pc
Smaller spanner (for nozzles disassembly): 1pc
Power plug: 1pc
Application
YIHUA-2008D hot air rework station can be used to weld SMD components, multi-pin IC, and circuit board components, in the areas including laboratories, schools, electronic production lines, mobile phone repair industry, and home appliance maintenance department.
Related Names
Digital Soldering Station | SMD Desoldering Tool | Electronic Parts Soldering Machine
If you need quick after-sales support
Please don't hesitate to send an email to !
Related products
Send Message
Most Recent
More
Other Products
Videos
