TJ250/45 Copper Flat Wire Line Manufacturer

TJ250/45 Copper Flat Wire Line

Request a Quote

About Us: http://continuousextrusion.com/1-1-copper-flat-wire-machine.html/114793/index.html

Continuous Extrusion Machine for Copper Wire, Strip and Flat Wire

This product has been discontinued and removed from our shelves.

1. Payoff machine 2. Straightener 3. Continuous extrusion machine 4. Cooling and drying system 5. Meter Counter
6. Guide pulley 7. Takeup machine 8. Hydraulic and lubrication system 9. Electric control cabinet 10. Operation console

This continuous rotary extrusion line is suitable for producing flat copper wires with ultra small sections. The sectional area is about 2.5m². The extruded products can be used to form enameled transposed conductors which are often used in EHV transformers.

Additionally, this range of continuous rotary extrusion machine is also commonly utilized to produce copper flat wires for use in motors, high power transformers, as well as industries such as military and aerospace, etc.

Technical Specifications

Main Functional Unit: Continuous Extrusion Machine
Model	TJ250
Nominal Diameter of Extrusion Wheel	250 mm
Rated Rotation Speed	11RPM
Power of Main Motor	45kW
Feed Stock (Copper Rod)
Diameter	Φ 8.0 mm
Diameter Tolerance	±0.2mm
Yield Strength	160MPa (Oxygen-free Copper Rod Produced by Upward Casting Process)
End Product : Flat Copper Wires
Sectional Area Range	2.5-60mm²
Max. Width	15mm
Standard	Conforms to GB5585.1-85 standard
Entire Production Line: Copper Wire Production Line
Average Output	100-150kg/h
Installed Capacity	380V, 3 phase, 75KVA
Flash Amount	1-2%
Workshop
Minimum Dimension	Length: 22m, Width: 7 m, Height: 4 m
Cooling Water	30 m³/h (Cooling Tower)
Compressed Air	0.7 MPa, 1 m³/min
Operator	2

Main Components of the Production Line

Copper Rod Payoff Machine	one set
Copper Rod Straightening Machine	one set
Copper Continuous Extrusion Machine	one set
Cooling and Oxidation-Prevention System (with Blow-drying Function)	one set
Meter Counter	two sets
Takeup Machine (630mm-800mm)	two sets
Electrical Control System (with Touch Screen)	one set
Hydraulic and Lubrication System	one set

Features

The TJ250/45 flat copper wire continuous rotary extrusion line uses the Φ8mm oxygen-free copper rod made by the upward casting technique as the raw material. This material can be easily prepared.
With special extrusion die design, this continuous extrusion equipment supports extrusion of two wires at the same time. This improves the production efficiency and dramatically cuts down the production cost.
The extruded wires eliminate the need for further processing such as drawing, rolling, or annealing. While ensuring quality, the production cost and investment cost are both degreased.

Continuous Extrusion Machine, Copper Extrusion Line, Continuous Rotary Extrusion Equipment Manufacturer