TJ250/45 Copper Flat Wire Line

TJ250/45 Copper Flat Wire Line
TJ250/45 Copper Flat Wire Line
TJ250/45 Copper Flat Wire Line
Request a Quote

Continuous Extrusion Machine for Copper Wire, Strip and Flat Wire

This product has been discontinued and removed from our shelves.

1. Payoff machine     2. Straightener     3. Continuous extrusion machine     4. Cooling and drying system     5. Meter Counter    
6. Guide pulley     7. Takeup machine     8. Hydraulic and lubrication system     9. Electric control cabinet     10. Operation console

This continuous rotary extrusion line is suitable for producing flat copper wires with ultra small sections. The sectional area is about 2.5m2. The extruded products can be used to form enameled transposed conductors which are often used in EHV transformers.

Additionally, this range of continuous rotary extrusion machine is also commonly utilized to produce copper flat wires for use in motors, high power transformers, as well as industries such as military and aerospace, etc.

Technical Specifications
Main Functional Unit: Continuous Extrusion Machine
Model TJ250
Nominal Diameter of Extrusion Wheel 250 mm
Rated Rotation Speed 11RPM
Power of Main Motor 45kW
Feed Stock (Copper Rod)
Diameter Φ 8.0 mm
Diameter Tolerance ±0.2mm
Yield Strength 160MPa (Oxygen-free Copper Rod Produced by Upward Casting Process)
End Product : Flat Copper Wires
Sectional Area Range 2.5-60mm²
Max. Width 15mm
Standard Conforms to GB5585.1-85 standard
Entire Production Line: Copper Wire Production Line
Average Output 100-150kg/h
Installed Capacity 380V, 3 phase, 75KVA
Flash Amount 1-2%
Workshop
Minimum Dimension Length: 22m, Width: 7 m, Height: 4 m
Cooling Water 30 m3/h (Cooling Tower)
Compressed Air 0.7 MPa, 1 m3/min
Operator 2
Main Components of the Production Line
Copper Rod Payoff Machine one set
Copper Rod Straightening Machine one set
Copper Continuous Extrusion Machine one set
Cooling and Oxidation-Prevention System (with Blow-drying Function) one set
Meter Counter two sets
Takeup Machine (630mm-800mm) two sets
Electrical Control System (with Touch Screen) one set
Hydraulic and Lubrication System one set
Features
  • The TJ250/45 flat copper wire continuous rotary extrusion line uses the Φ8mm oxygen-free copper rod made by the upward casting technique as the raw material. This material can be easily prepared.
  • With special extrusion die design, this continuous extrusion equipment supports extrusion of two wires at the same time. This improves the production efficiency and dramatically cuts down the production cost.
  • The extruded wires eliminate the need for further processing such as drawing, rolling, or annealing. While ensuring quality, the production cost and investment cost are both degreased.
Related:

Continuous Extrusion Machine, Copper Extrusion Line, Continuous Rotary Extrusion Equipment Manufacturer

Related products
Send Message
Inquiry
Inquiry