MGS-H01/H16 Magnetic Guide Sensor

MGS-H01/H16 Magnetic Guide Sensor
MGS-H01/H16 Magnetic Guide Sensor
MGS-H01/H16 Magnetic Guide Sensor
MGS-H01/H16 Magnetic Guide Sensor
Request a Quote

Magnetic sensors product, Magnetic line sensor

Features
  • High accuracy, large testing air-gap.
  • Wide power voltage range 12-24Vdc, ideal for harsh environments
  • Compact and easy to install
  • The detecting air-gap is more than 40mm upon customer request
Technical Parameters
Model MGS-H01 MGS-H16
Power Supply DC l2.6V to 24V, ripple 1% max. DC l2.0V to 30V, ripple 1% max.
Power Consumption 30mAmax
Operation Temperature -10 to 60°C (storage: -20 to 70°C)
Operation Humidity 35% to 90%RH (avoid dew condensation)
Enclosure Rating IP-65
Operation Air Gap* 35 to 40mm (with MGT-50 magnetic tape)
Target Magnet MGT-50, MGT-50 -25-A, MGT-50-25-B
Insulation Resistance 100 MΩ
Deviation Out Output Element Operational amplifier 16 bit NPN open collector load current: less than 1 00mA
Load Resistance 2KΩmin.
Output Impedance 6.5Ω max. (Ta=23°C)
Short Circuit Protection Between output and GND
Response Time 2.5ms
Voltage Range 2V to 8V
Center Voltage 5V
Step Pitch Straight mode; 0mm to 1 00mm±30
Step Voltage Straight mode; 0.167V, right or left branch mode; 0.333V
Voltage Accuracy ±15mV
Gate Out Area ±90mm from center of magnetic tape
Operation Air Gap 40 to 35mm, for MGT-50
Output Logic Negative
Circuit Transistor open collector DC 24V max. sink current 100mA max
Response 2.5ms
Dimension
Application

YUANBEN’s MGS series magnetic guide sensor is usually installed on the bottom of AGV and ensures the AGV follows a guide path of magnetic tape laid out on the floor. The MGS is a sensor prominently used in the logistics industry or production line batching section warehouses. Due to their high sensitivity, long detection range and excellent adaptability to harsh environments, YUANBEN’s self-developed magnetic guide sensors are ideal for installation of AGVs in unmanned warehouses.

Related products
Send Message
Inquiry
Inquiry