Heat Shrink Boot
Request a Quote
This heat shrink boot is used for the insulation and sealing of joints linking cable terminations to equipment. It is made of light and non-toxic polyolefin that has prominent dielectric properties, brilliant insulation performance and outstanding resistance to chemical corrosion. In addition, non-toxic and flame-retardant adhesives are smeared on the end of the inner wall to make a close bond with the cables. Different shapes of components are supplied to meet a range of requirements.
Download
Technical Data
| Property | Test Method | Standard Value |
| Tensile | ASTM-D-638 | ≥10MPa |
| Elongation | ASTM-D-638 | ≥300% |
| Tensile Strength After Heat Aging (130℃×168h) | ASTM-D-5510 | ≤±20% |
| Elongation at Break After Heat Aging (130℃×168h) | ASTM-D-5510 | ≤±20% |
| Volume Resistivity | IEC 60093 | ≥1x Ω.cm |
| Dielectric Strength | IEC 60243 | ≥25kV (mm) |
Related products
Send Message
Most Recent
More
Other Products
Videos
