Pusher Centrifuge

Pusher Centrifuge
Pusher Centrifuge
Request a Quote

The HR pusher centrifuge is a two-stage filter centrifuge that works continuously but discharges filter cakes intermittently, and it can finish feeding, filtration, washing and discharging operations smoothly even at full speed.

Main Characteristics of Pusher Centrifuge
1. Due to its stable and continuous operation, this industrial centrifuge exhibits high production capacity.
2. During first stage and second stage, water is fully removed, leading to a very low moisture content of product cakes.
3. When there is a requirement for the purity of finished solids, washing could be conducted, while wash liquid and original suspension are discharged separately to avoid cross contamination.
4. This horizontal chemical centrifuge consumes very little power without power fluctuation.

Technical Data of Pusher Centrifuge
ModelHR400-NHR500-NHR630-NHR800-NHR1000-N
Diameter (mm)337/400438/500560/630720/800920/1000
Filtering length (mm)145/155180/180240/240240/320240/320
Speed (r/min)1500-22001200-20001000-1800800-1600650/1250
Separating factor503-1083402-1118352-1140286-1145236/875
Length of stroke (mm)4050505050
Frequency of stroke (s-1)30-8030-8030-8030-8020-70
Main motor power (kW)7.5-1530-5537-5555-7575-90
Oil pump motor power (kW)4-5.522303745
Production capacity (t/h〕1-85-158-3415-4018-50
Dimensions (L×W×H, mm)2460×1286
×1030
2750×1480
×1490
3690×1600
×1265
3700×1800
×1450
4200×1900
×1900
Weight (kg)248031004100700012000

Application
Our pusher centrifuge is applicable for suspension liquids whose concentration is over 40% and particle size is bigger than 0.15mm. So, it is commonly adopted for the production of urea, caffeine, polyethylene, polystyrene, oxalic acid, sodium sulphate, sodium chloride, ammonium nitrate, ammonium chloride, ammonium bicarbonate and similar products used in chemical, pharmaceutical, food and light industries.

Selection Guide
Piston pusher centrifuge is highly recommended under the following conditions:
1. There are strict requirements for the yield, purity and moisture content of filter cake.
2. For the suspension liquid, its mass percent is within 30%-80%, its viscosity is less than 10-1 Pa·s, and its particle is size is over 0.15mm on average.

Optional Configuration
1. Raw Material: Common stainless steel, special stainless steel, copper alloy or titanium alloy for machine parts that will come into contact with suspension during work.
2. Motor: Common motor, explosion-proof single-speed motor, etc.
3. Liquid Discharge: The suspension and wash liquid could to discharged together or separately.
4. Sieve Clearance: Any value within 0.08-0.40mm
5. Our pusher centrifuge can be designed and manufactured according to GMP standard.
6. Other requirements can be negotiated.

Structure of Pusher Centrifuge
1. Material Pusher
2. Bearing Seat
3. Main Axis
4. Push Rod
5. First Stage
6. Second Stage
7. Sieve
8. Material Collection Groove
9. Housing
10. Feed pipe
11. Wash Pipe
12. Shock Absorber
Related products
Send Message
Inquiry
Inquiry