Rotary Blasthole Drilling Rig, KG520/KG520H
Surface down-the-hole drill rig for open-pit mining
The rotary blasthole drilling rig is equipped with a 4-cylinder YUCHAI engine with low emission and less pollution. The construction machine features a piston motor and reinforced continuous track, both of which help the drill rig work better in ramp climbing. Owing to the wide swing and tilt angles, the extraction tool is suitable for various drilling applications. Characterized by two rotational motors that can boost feed and pull out force and reliable operation, this surface drill rig features reinforced materials strong enough for its transportation from site to site. Additionally, the rotary blasthole drilling rig is equipped with a dry dust collector that can help reduce pollutants to the air.
Model | ||
Total weight | 6500kg | 7000kg |
Dimensions | 6800×2200×2850mm | 6800×2250×2850mm |
Rock hardness | F=6-20 | |
Hole diameter | Ø105-152mm | |
Hole depth | 25m | |
RPM | 0-110rpm | |
Maximum rotation torque | 4000N.m(Max) | |
Pull out force | 25kN | |
Feed type | Motor roller chain | |
Feed extension travel | 4150mm | |
Tramming speed | 0-4km/h | |
Gradeability | ≤30° | |
Ground clearance | 440mm | |
Tilt angle | Down:135°, up:50°, total:185° | |
Swing angle | Left:50°, right:50°, total:100° | |
Boom tilt angle | Down:50°, up:25°, total:75° | |
Boom swing angle | Left:45°, right:45°, total:90° | |
Oscillation angles | ±10° | |
Boom extension | 900mm | |
Engine type | YC4DK100-T304(73kW/2200r/min)/Yuchai YC4DK100-T304(73kW/2200r/min) | |
DTH hammer | K40 | |
Drilling rod | Ø76×3m, Ø89×3m/Ø76×3m, Ø89×3m | |
Flushing air | 15-22m³/min | |
Maximum height of horizontal hole | 3500mm | |
Minimum height of horizontal hole | 350mm |
- Diesel engine portable screw air compressor
Kaishan LGCY-18/17
Kaishan LGCY-19.5/19
Kaishan LGCY-22/20
Note: Air compressor selection depends on the hole diameter and air hose length.