High Pressure Water Injection Pump
Plunger pump/ Reciprocating water pump/ Booster pump
The high pressure water-injection pump is a horizontal, triple plunger, single-acting reciprocating pump that boasts incredible power and efficiency. These pumps are primarily used in petrochemical applications for high pressure cleaning and water supply in mining areas. It delivers clean water below 80°C and transports waste water in oilfield operations.
This pump is made up of its power end, fluid end, transmission and motor. The whole water pump is installed on top of the skid-mounted base.
We can perform custom design specifications
The pressure from 8MPa to 45MPa.
Flow from 51L/min to 1666L/min.
3ZB44series, 3ZB75series, 3ZB127series ,5ZB127series,5ZB175series
Shipment prepped in winter, 2015
Technical Parameters of the 3ZB344 High Pressure Water Injection Pump
| Input media | clean water,sewage | |||||
| Medium temperature(°C) | ||||||
| Suction pressure(Mpa) | 0.3-1.0 | |||||
| Rated discharge pressure | Mpa | 10 | 11 | 13 | 17 | 20 |
| Bar | 100 | 110 | 130 | 170 | 200 | |
| Rated flow | m³/h | 6.3 | 5.6 | 4.8 | 3.5 | 3.1 |
| l/min | 105 | 93.3 | 80 | 58.3 | 51.6 | |
| Theoretical flow | m³/h | 7.5 | 6.7 | 5.7 | 4.2 | 3.7 |
| l/min | 125 | 111 | 95 | 70 | 61.6 | |
| Plunger diameter(mm) | 40 | 38 | 35 | 30 | 28 | |
| Stroke length (mm) | 44 | |||||
| Pump speed (r/min) | 750 | |||||
| Pump efficiency % | >89 | |||||
| Moter | Type | Y2-280S-8 | ||||
| Power | 37kw | |||||
| Speed | 750r/min | |||||
| Voltage | 380v | |||||
| Entrance diameter(mm) | φ48×4 | |||||
| Outlet diameter(mm) | φ46×8 | |||||
| Overall dimension(mm) | 2000×600×700 | |||||
| Overall weight(kg) | 1300 | |||||
Technical Parameters of 3ZB127 High Pressure Water Injection Pump
| Input media | Clean water,sewage | |||||
| Medium temperature(°C) | ||||||
| Suction pressure(Mpa) | 0.3-1.0 | |||||
| Rated discharge pressure | Mpa | 40 | 34 | 27 | 22 | 16 |
| Bar | 400 | 340 | 270 | 220 | 160 | |
| Rated flow | m³/h | 8.2 | 9.6 | 12.1 | 15 | 19.5 |
| l/min | 136.7 | 159.3 | 200.8 | 249 | 323.7 | |
| Theoretical flow | m³/h | 9.1 | 10.6 | 13.5 | 16.6 | 21.6 |
| l/min | 151.7 | 175.9 | 224.1 | 275.5 | 358.5 | |
| Plunger diameter(mm) | 37 | 40 | 45 | 50 | 57 | |
| Stroke length (mm) | 127 | |||||
| Pump speed (r/min) | 370 | |||||
| Pump efficiency % | >89 | |||||
| Moter | Type | YF2-315S-4 | ||||
| Power | 110kw | |||||
| Speed | 1480r/min | |||||
| Voltage | 380v | |||||
| Entrance diameter(mm) | φ114×4 | |||||
| Outlet diameter(mm) | φ61×11 | |||||
| Overall dimension(mm) | 3460×1886×1760 | |||||
| Overall weight(kg) | 4500 | |||||
Technical Parameters of 5ZB175 High Pressure Water Injection Pump
| Input media | Clean water,sewage | |||||
| Medium temperature(°C) | ||||||
| Suction pressure(Mpa) | 0.3-1.5 | |||||
| Rated discharge pressure | Mpa | 45 | 36 | 30 | 23 | 15 |
| Bar | 450 | 360 | 300 | 230 | 150 | |
| Rated flow | m³/h | 20.2 | 24.9 | 31.2 | 39.5 | 60.5 |
| l/min | 336.7 | 415 | 520 | 658.3 | 1004.3 | |
| Theoretical flow | m³/h | 23.7 | 29.3 | 36.7 | 46.5 | 71.2 |
| l/min | 395 | 488.3 | 611.7 | 775 | 1182.7 | |
| Plunger diameter(mm) | 45 | 50 | 56 | 63 | 78 | |
