Telecom Power Cable Type II

Telecom Power Cable Type II
Request a Quote

Telecom power cable Type II has a conductor of stranded tinned copper wires per ASTM B172, a separator tape and limited smoke, non-halogen polyolefin insulation.

Telecom power cable Type II can be used at 600 volts, 105°C dry, 75℃ wet.

Applications:

Telecom power cable Type II is for use in central offices, telecom power systems (batteries and rectifiers), transmission and remote control systems. It is suitable for both fixed and mobile installations. Custom telecom power cable can be made upon request according to different performance requirements.

Standards:

Our telecom power cable Type II meets UL 44, UL 66 and UL 758 standards. It has passed the following mechanical and electrical tests: FT4-ST1 vertical-tray flame test and smoke release test, VW-1 vertical flame test, FT2 horizontal flame test, aging test on insulation materials, dielectric voltage withstand test, etc.

Specifications:
Part Number Conductor Size Stranding Insulation Thickness(mm) Complete Cable Diameter (mm)
Type II 18AWG 7/0.40 0.76 3.0
Type II 16AWG 7/0.50 0.76 3.3
Type II 14AWG 41/0.254 1.14 4.9
Type II 12AWG 65/0.254 1.14 5.3
Type II 10AWG 105/0.254 1.14 6.1
Type II 8AWG 41/0.50 1.52 7.4
Type II 6AWG 65/0.50 1.52 8.4
Type II 4AWG 105/0.50 1.52 10.3
Type II 2AWG 165/0.50 1.52 11.6
Type II 1/0AWG 266/0.50 2.03 14.9
Type II 2/0AWG 342/0.50 2.03 16.3
Type II 4/0AWG 532/0.50 2.03 19.3
Type II 350AWG 882/0.50 2.41 24.8
Type II 500AWG 1221/0.50 2.41 28.3
Type II 750AWG 1850/0.50 2.79 33.9
Related products
Send Message
Inquiry
Inquiry