Telecom Power Cable Type IV

Telecom Power Cable Type IV
Request a Quote

Telecom power cable Type IV has a conductor of stranded tinned copper wires per ASTM B172 with a separator tape wrapped over it. The limited smoke, non-halogen polyolefin insulation is covered with a separator tape and a natural cotton braid. Fire retardant material is applied over the whole assembly.

Telecom power cable Type IV can be used at 600 volts, 90°C dry, 75℃ wet.

Applications:

Telecom power cable Type IV is for use in central offices, telecom power systems (batteries and rectifiers), transmission and remote control systems. It is suitable for both fixed and mobile installations. Custom telecom power cable can be made upon request according to different performance requirements.

Standards:

Our telecom power cable Type IV meets UL 44, UL66 and UL 758 standards. It has passed the following mechanical and electrical tests: FT4-ST1 vertical-tray flame test and smoke release test, VW-1 vertical flame test, FT2 horizontal flame test, aging test on insulation materials, dielectric voltage withstand test, etc.

Specifications:
Part Number Conductor Size Stranding Insulation Thickness(mm) Complete Cable Diameter (mm)
Type IV 18AWG 7/0.40 0.76 4.8
Type IV 16AWG 7/0.50 0.76 5.1
Type IV 14AWG 41/0.254 1.14 6.4
Type IV 12AWG 65/0.254 1.14 6.9
Type IV 10AWG 105/0.254 1.14 7.6
Type IV 8AWG 41/0.50 1.52 9.0
Type IV 6AWG 65/0.50 1.52 10.0
Type IV 4AWG 105/0.50 1.52 11.8
Type IV 2AWG 165/0.50 1.52 13.2
Type IV 1/0AWG 266/0.50 2.03 16.6
Type IV 2/0AWG 342/0.50 2.03 18.1
Type IV 4/0AWG 532/0.50 2.03 21.0
Type IV 350AWG 882/0.50 2.41 26.4
Type IV 500AWG 1221/0.50 2.41 29.7
Type IV 750AWG 1850/0.50 2.79 35.4
Related products
Send Message
Inquiry
Inquiry