Silane Crosslinking Cable Extrusion Line

Silane Crosslinking Cable Extrusion Line
Silane Crosslinking Cable Extrusion Line
Request a Quote

XLPE Insulation Line for Low Voltage & Medium Voltage Cables

This cable extrusion line adopts silane cross-linking technology that can provide great flexibility and superior mechanical performance. For manufacturing silane XLPE insulated cables of voltage higher than 1.8/3(3.6)kV, three layers of conductor screen layer, insulation layer and insulation screen layer are extruded in one step. When the XLPE insulated cables of voltage below 1.8/3(3.6)kV need to be produced, operator can use one extruder from all the three to independently extrude the insulation layer.


Technical Parameters
Voltage class 6kV/15kV or below
Conductor size 25-300mm2
Max. cable diameter 40mm
Cable construction Conductor screen
(inner semiconductor layer) 0.5-2mm
Insulation 2-5.5mm Insulation screen
(outer semiconductor layer) 0.5-2mm
Line speed 0-30m/min
Length of warm water trough 18m
Length of cooling water trough 12m
Arrangement of extruders Φ65 extruder for conductor screen
Φ120 extruder for silane XLPE
Φ90 extruder for insulation screen
Electricity Installation capacity 336kVA 380 V ±10% 50Hz±1% 3 phase 4 wire
Water Water pressure 0.2-0.6MPa Water consumption 10m3/h 
(circulating water from reservoir)
Diagram

Tags
  • LV/MV insulation line
  • cable extrusion solution
  • power cable sheathing line
  • jacketing line
  • cable stranding machine
  • cabling machine
Related products
Send Message
Inquiry
Inquiry