Roll Forming Line for Cable Tray
Request a Quote
Cable tray forming machine is used for producing cable tray through cold roll forming of hot dip galvanized steel coils with the thickness of 0.6-2.0mm.
Specifications| The Line’s Specifications | |
| Weight | About 50000kgs |
| Whole line’s dimension | About 45m x 3m x 1.5m (length x width x height) |
| Color | Main color: green |
| Warning color: yellow | |
| Suitable Raw Material | |
| Material | Galvanized or Galvalume Coils |
| Thickness | 0.6-2.0mm |
| Coil width | According to products size |
| Yield Strength | 235Mpa |
| Main Technical Parameters | |
| Quantity of forming rollers stations | About 24 |
| Diameter of forming rollers shafts | 75mm |
| Roll Forming Speed | 10-15m/min |
| Production Speed | 4-6m/min |
| Forming rollers material | Gcr15 mould steel, with quenched treatment |
| Cutter material | CR12 mould steel, with quenched treatment |
| Controlling system | Panasonic PLC and Yaskawa Converter |
| Electric Power requirement | Main motor power: 4x5.5kw |
| Hydraulic unit motor power: 5.5kw | |
| Electric voltage | According to customer’s requirement |
| Main Components | |
| Decoiler (manual and automatic for options) | 1 set |
| Guiding device | 1 set |
| Leveling system | 1 set |
| Punching machine | 1 set |
| Roll Forming system | 1 set |
| Hydraulic Cutting system | 1 set |
| PLC control box | 1 set |
| Hydraulic unit | 1 set |
| Run outs tables | 1 set |
Our strut channel roll forming machine can be customized according to your requirements of size and raw material. We are committed to guarantee your roll forming system top performances after commissioning. With ease to install and operate, it can start working automatically after refilled with hydraulic fluid according to the instructions. You can refer to our provided video or consult our professionals for help when you encounter any problems with installation and use.
GalleryRelated products
Send Message
Most Recent
More
Other Products
Videos
