MIG Welding Machine / Inverter Welder

MIG Welding Machine / Inverter Welder
MIG Welding Machine / Inverter Welder
MIG Welding Machine / Inverter Welder
MIG Welding Machine / Inverter Welder
MIG Welding Machine / Inverter Welder
MIG Welding Machine / Inverter Welder
MIG Welding Machine / Inverter Welder
MIG Welding Machine / Inverter Welder
MIG Welding Machine / Inverter Welder
MIG Welding Machine / Inverter Welder
Request a Quote

MIG 145E

Features
  • Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology;
  • High performance in GASLESS modes, available to 1kg flux-cored self-shield wire, actually welding without gas;
  • Digital display and with MMA function;
  • Automatic identification of wire diameter, easy to adapt to 0.8 and 0.9mm wire welding;
  • Expert parameters built-in, synergic control the voltage and current for easy and better welding;
  • Stable welding performance on small current around 40A, enhancing the capacity to weld thinner metal, even 0.8mm sheet;
  • Wire inching function acts as you press the trigger about 3s under no load;
  • Fan as needed, reduce noise and dust inside the machine;
  • Compact and portable (6kg) with handle, and reserved shoulder strap mounting holes;
  • Intelligent protection: over-current, over-voltage, over heating protection;

Specifications
Item MIG 145E MIG 145E
Power supply (V) 1 phases 120V±15% 1 phases 230V±15%
Frequency (Hz) 50/60 50/60
Welding process MIG(FCAW) MMA MIG(FCAW) MMA
Rated input current (A) 25.1 (Ieff=13.8) 27.2 (Ieff=12.2) 13.1 (Ieff=7.2) 14.2 (Ieff=7.8)
Welding current range (A) 30-125 40-100 30-125 40-100
Output voltage range (V) 15.5-19 20.8-23.2 15.5-19 20.8-23.2
No-load voltage (V) 56 56
Duty cycle,40℃ 90A/30% 80A/20% 90A/30% 80A/20%
Power factor ≥0.71 ≥0.71
Efficiency (%) ≥80% ≥80%
Type of wire feeder Internal / Internal /
Welding-wire diameter (mm) 0.8/0.9(flux-cored wire) 1.6/2.0/2.4/(3.2) 0.8/0.9(flux-cored wire) 1.6/2.0/2.4/(3.2)
Insulation class F F
Protection grade IP21 IP21
Weight without wire roller (kg) 6 6
Dimension (L×W×H) (mm) 330×168×257 330×168×257

Package Included
  • Steel brush hammer
  • Earth clamp
  • 0.8mm flux-cored wire, 0.5kg
  • Fixed MIG torch with cable
Applications
Optional Welding Accessories
  • Handheld welding mask

  • Shoulder strap

  • 1 set electrode holder

Related products
Send Message
Inquiry
Inquiry